OK, replacing my worn, sagging leaf springs with new OME. The OME bushings I got are fine for the shackle (rear & front) ends, but not for the fixed (hanger) ends. For the front springs, I ordered new hangers that had holes to mount the small plate that works with the OME greaseable shackle pin.
However, for the rear, I can't find suitable rear, fixed hangers. The hangers I have are fine, but the through bolt is nearly 19mm in diameter (~18.85mm) and I've found no OME bushings that will allow such a monstrous bolt through. If I can just find a different bushing that will allow me to use my existing hangers (with a new, enormous bolt) that would be preferable, but I don't seem to be able to find any that are so large. Any ideas/suggestions?
However, for the rear, I can't find suitable rear, fixed hangers. The hangers I have are fine, but the through bolt is nearly 19mm in diameter (~18.85mm) and I've found no OME bushings that will allow such a monstrous bolt through. If I can just find a different bushing that will allow me to use my existing hangers (with a new, enormous bolt) that would be preferable, but I don't seem to be able to find any that are so large. Any ideas/suggestions?