Rear Axle Full Float Backing Plate Separation (2 Viewers)

[csd1982]

Hi,

Is there a way to separate the dust shield from the plate that bolts to the axle? There looks to be 4 or maybe 6 pins that hold the dust plate on. Maybe they can be pressed out than back in. I’m restoring a rusty 80 axle for my build and I want to get this part to clean up and paint/por15.

See stock image. 4 silver pins and 2 black pins.

 

[Saito]

It’ll come apart. But it won’t go back together. Those are like giant rivets and the pin that the shoes pivot on is even bigger and pressed through it all. I cut mine down to just the caliper bracket and deleted ABS sensors and parking brake. I’d just penny up for the reproduction ones and be done with it. It’s a chore.

 

[csd1982]

Thanks for the education

 

[LandLocked93]

$550!? Blyme!

 

[AcroSteve]

Check @TRAIL TAILOR

Less than 400 for a new pair shipped, I believe

 

[TRAIL TAILOR]

Check @TRAIL TAILOR

Less than 400 for a new pair shipped, I believe

80 Series Rear Full Float Disc Brake Shields

Toyota Land Cruiser 80 Series Rear Full Float Disc Brake Shields Reproduction of OEM Toyota Shields ( no longer available) Stamped steel components All OEM brake fittings interchange Direct replacement for all 80 series full float rear applications SOLD IN PAIRS ONLY

trail-tailor.com

 

[leonard_nemoy]

Drill out the pins and than weld them back on when done?