Wanted Parts for FJ40 3B conversion (PS pump, engine mounts, wiring, etc..)

[Splangy]

Location

United States

I posted this in the wanted section but figured it may get more attention here:

I'll be putting a 3B & H55F into my '81 FJ40 soon and am looking for the following parts:

BJ42 Frame engine mounts (the mounts that are riveted to the frame) - I really need these!
BJ42 fan shroud 3B power steering pump idler and crank pulleys.
Vacuum tank & tubing


Thanks!

 

[ClemsonCruiser]

I've got a the PS pump. PM me if you are interested.

 

[roma042987]

Noticed my 75 doesn't have a restriction in the fuel filler while the 78 does. May want to research that a bit.

 

[YardPig]

Believe I have a chunk of downpipe, like the flange and a bit of pipe only.

 

[Splangy]

Bump.

 

[autokalikot]

I have a pair of BJ40 frame engine mounts. Does it differ from a BJ42? Let me know if you are interested from zip 92808.

 

[Splangy]

Still looking for a lot of this stuff...

 

[Splangy]

Still looking...

 

[Splangy]

Still looking....

 

[Dbradford04]

Still looking....

I have a complete wiring harness for an 81 bj 42, but need it until I complete my re-wiring with painless kit. Don't know how quickly you need it, but probably not ready to part with mine for a few months.

 

[orangefj45]

send me a pm with the complete list of parts you're looking for. i have a 79 BJ40 with a blown up engine, maybe some of the parts will interchange. we removed the B engine and are in the finishing stages of installing a 13BT.
hth
georg @ valley hybrids

 

[Splangy]

Still looking.

 

[Dbradford04]

Splangy,

PM me your address. I will ship all the wiring I have when I return at the end of this month. No idea how complete it is, but it looks pretty good to me.

D

 

[Splangy]

 

[Splangy]

BUMP!

I could really use a diesel fuel filler neck and a set of engine mounts (the portion that's riveted to the frame.)

 

[Splangy]

Bump.

 

[orangefj45]

Did you try cruiserparts.net for the frame mounts?!

 

[Splangy]

Bump! I've received a lot of "I got those" and then the person drops off the face of the planet!

Somebody must have this stuff!

 

[joekatana]

Bump! I've received a lot of "I got those" and then the person drops off the face of the planet!

Somebody must have this stuff!

I got them but am keeping them as template for future swaps

But I noticed a tread from I believe it was AWLTEQ (?) where he makes really nice new ones for 90$

It took me about half a day to make a copy from mine so I consider this a Bargain

Joe

 

[84BJ42]

Diesel filler neck

I should have a diesel filler neck if you still need one. Let me know and I will have a look for it.