OTMT - URGENT Need Help - Hub Studs

[Sputnik40]

I need 3 or more FJ40 hub studs, cone washers, flat washers and nuts. Does anyone have them OR have a dealer that might have them and can bring them to me at McNabb Friday by noonish??? Marshall, JP, David - anyone???

I don't have to have them - but it's the difference between just installing the new studs on the driver side hub and bolting it up and going wheeling - versus pulling the hub and removing the rotor and bearing races to install on my new 6 pin hub... 15 minute job versus 1.5 hours - so no biggie!

Left side is now 6 pins - 2 stock and 4 oversized with the Aisin drilled the same. I have the 6 pin flanges - but McNabb is so far away from State Line I don't want to be driving in 4 wheel drive all the time - plus driving in 4 wheel drive on the return from Schoolbus/Helicopter suks!

 

[VTCruiser]

see if Ralph hayes has them, and if so maybe the clemson mafia can grab them for you...

 

[Trollhole]

Bill I don't have any accessable. They are on an axle at work. I'm hoping someone else will chime in.

 

[CandyPants]

I have some but I only have those that are on my hubs I got for my 55. Can I have them back when you are done with them? I don't have extra, I just have mine that I haven't installed yet. I should make it to McNabb around lunch time with the crew coming from ATL.

 

[Sputnik40]

Marshall - I don't need em that bad - I have 6 in my spare... Not worth pulling em.

Heather - yes - if you are not using and have not installed - please bring them. I won't give them back - will mail you new ones UPS Ground if that works, borrow new - replace with new, etc. You don't want em back after I use them .

Studs, cones, nuts, washers - only really need 3 or 4 I think...

Lemme know - it's not that urgent - but I'd like to see what can be worked out.

Thanks to all.

I have some but I only have those that are on my hubs I got for my 55. Can I have them back when you are done with them? I don't have extra, I just have mine that I haven't installed yet. I should make it to McNabb around lunch time with the crew coming from ATL.

 

[GXO]

I think I only have old 80 series stuff, not sure if they will work...

 

[CandyPants]

Marshall - I don't need em that bad - I have 6 in my spare... Not worth pulling em.

Heather - yes - if you are not using and have not installed - please bring them. I won't give them back - will mail you new ones UPS Ground if that works, borrow new - replace with new, etc. You don't want em back after I use them .

Studs, cones, nuts, washers - only really need 3 or 4 I think...

Lemme know - it's not that urgent - but I'd like to see what can be worked out.

Thanks to all.

I'll bring what I have. And mine aren't new...came of an old piggy I robbed not too long ago. I am sure we can work it out. I just need to have studs before my HAMOM in September.

 

[ClemsonCruiser]

Bill I believe I have the studs from the 60 series acles I bought a while back, but won't know for sure until I get up to Clemson in the morning......... If I have them I will pull them and bring them for you; well I guess that is if they will work for you......Aisans 60 series???

let me know

 

[Capt. Jim]

Bill,

Hub studs are rare here, too. I will check my parts box later and bring any I have when I bring Mike's stuff. Call me later.

 

[Sputnik40]

I already have most your spares .... but yeah, lemme know - loading the trailer between 6 and 8. See you thereroundabouts.

Bill,

Hub studs are rare here, too. I will check my parts box later and bring any I have when I bring Mike's stuff. Call me later.