Official ONSC member buying/selling thread (14 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
forrest5000
SILVER Star
Got another one?
I’m sure I’ll borrow one of your Miller Lites.
Nope. I didn’t even know I had that one until I looked today. Wish I’d had three more.
I am looking for a set of crossbars or roof rack for my 60. I'm planning on making the 60 into the camping rig and would like to put the RTT on it. I have a roof rack for an 80 but would rather no modify it to fit the 60.
Cross posting this a complete Trexbox setup for 200 series for sale in Charlotte for $2500:
forum.ih8mud.com
SOLD - Charlotte NC/200 Series Trex Box Storage System/Price Drop
Helping list for a buddy who is not on here much. He traded in his 200 and dealer requested he remove and install third row seat. This is both drawers and the wings for a clean complete look. It is less than a year old with no defects. It also comes with not pictured a split cutting board and...
forum.ih8mud.com
Also 2019 200 series wheels and tires less then 1000 miles:
forum.ih8mud.com
For Sale - Charlotte NC/2019 200 Series Factory Wheels and Tires
Posting for a friend who is not on here much. These have less then 1000 miles on them. 5 wheels and 4 tires, tires are factory 285/60/18 Dunlop Grandtrek AT23 no scrapes on the wheels, no plugs or defects with the tires, no TPMS sensors included. He upgraded to Evo Corse wheels prior to trading...
forum.ih8mud.com
Cross posting this a complete Trexbox setup for 200 series for sale in Charlotte for $2500:
SOLD - Charlotte NC/200 Series Trex Box Storage System/Price Drop
Helping list for a buddy who is not on here much. He traded in his 200 and dealer requested he remove and install third row seat. This is both drawers and the wings for a clean complete look. It is less than a year old with no defects. It also comes with not pictured a split cutting board and...
The table attaches to the bottom of one of the drawers when extended, correct? Any chance he's also got the cargo barrier?
Thats correct it mounts to bottom of left drawer with brackets which are included. It is the AUX work station on their website. He doesn't have the cargo barrier. Thanks
found a wheel....no longer need.
JToobe
SILVER Star
I'm hoarding a set of five....guess I could let one go.
Just saw your update, glad to hear you found one!
sleepycruiser
I will get by….I will survive -Touch of Grey LC200
It’s official.....going to list the 100. 
I will get pics and info up this weekend. 248k. No rust. Interior is in great shape. 3rd row. Exterior is pretty good as well. Android head unit, tailgate storage, new-ish KO2s. Weathertechs. Message me for more info/pics before I lost officially.
I will get pics and info up this weekend. 248k. No rust. Interior is in great shape. 3rd row. Exterior is pretty good as well. Android head unit, tailgate storage, new-ish KO2s. Weathertechs. Message me for more info/pics before I lost officially.
NCTrey133
@Sweet_Brown_80
Hutchinson Rock Monster Double Beadlock Wheels (QTY5)
17" with a 6x5.5 bolt pattern
Bought them from a friend who moved on from his 4runner and went to a 200 series, I thought I'd use them on the 80 but I'm in need of some $ and will stick with the wheels I got for now.
$1500 obo
Low miles on the wheels, all hardware included - one wheel (second closest in the picture) has some rock rash from the first owner. I've never mounted them on my 80, they've just sat in storage.
Located in Mebane NC but can travel to meet if anyone wants them.
17" with a 6x5.5 bolt pattern
Bought them from a friend who moved on from his 4runner and went to a 200 series, I thought I'd use them on the 80 but I'm in need of some $ and will stick with the wheels I got for now.
$1500 obo
Low miles on the wheels, all hardware included - one wheel (second closest in the picture) has some rock rash from the first owner. I've never mounted them on my 80, they've just sat in storage.
Located in Mebane NC but can travel to meet if anyone wants them.
1990 Toyota Pickup 4x4 DLX with 3VZE, approx 224K, 5 speed - $2900, owned since 2015
I don't need anymore, have put on approx 3k in the last 4 years around the property and trips around the area. Located in Boone.
Rust on bottom tailgate and top of wheel wells - will add pics once I take them. Spent most of it's life in CA, TN and AR outside of the rust belt prior to 2011, one owner before me - well one owner family. Needs emergency brake cable front portion replaced and tailpipe broke off - have parts but don't plan on installing/repairing.
Century truck cap with Yakima mounting brackets
4 Runner SR5 Bucket seats (driver side fabric worn/torn)
Hella headlights with custom wire harness upgrade
General Grabber AT2 tires in 235/75R15 on stock rims
Warn locking hubs
New since 2011, by PO, receipts for all:
Timing belt with tensioner / idler bearings / water pump
Belts / Hoses
Valve cover gaskets
Professionally undercoated
Front brakes / calipers / hard and soft lines
Bilstein shocks (2015)
Marlin Crawler shifter bushings
Limited slip installed from a 2nd generation Toyota Supra
Rust on bottom tailgate and top of rear wheel wells - will add pics once I take them. Spent most of it's life in CA, TN and AR outside of the rust belt. Clear coat is gone on a large portion of the truck and cap. Hasn't been out on the salted roads this season as of yet....
I don't need anymore, have put on approx 3k in the last 4 years around the property and trips around the area. Located in Boone.
Rust on bottom tailgate and top of wheel wells - will add pics once I take them. Spent most of it's life in CA, TN and AR outside of the rust belt prior to 2011, one owner before me - well one owner family. Needs emergency brake cable front portion replaced and tailpipe broke off - have parts but don't plan on installing/repairing.
Century truck cap with Yakima mounting brackets
4 Runner SR5 Bucket seats (driver side fabric worn/torn)
Hella headlights with custom wire harness upgrade
General Grabber AT2 tires in 235/75R15 on stock rims
Warn locking hubs
New since 2011, by PO, receipts for all:
Timing belt with tensioner / idler bearings / water pump
Belts / Hoses
Valve cover gaskets
Professionally undercoated
Front brakes / calipers / hard and soft lines
Bilstein shocks (2015)
Marlin Crawler shifter bushings
Limited slip installed from a 2nd generation Toyota Supra
Rust on bottom tailgate and top of rear wheel wells - will add pics once I take them. Spent most of it's life in CA, TN and AR outside of the rust belt. Clear coat is gone on a large portion of the truck and cap. Hasn't been out on the salted roads this season as of yet....
Last edited:
Free. Masterbuilt electric fryer. Needs a lid. Full disclosure - I've had this about 3 years; got it from the original owner who said he used it about 6-8 times before breaking the lid. I never used it. Forgot I even had it so that means I don't need it. Can deliver to Xmas Party or somebody in the CLT area who can get it ASAP or it's going bye bye.
Diawa pleather cart bag. Mid-sized, carryable, not the typical giant, status symbol bag. Comes with whatever clubs are in it...should be a complete set...I’d have to go look and it’s in the basement and I’m lazy so maybe I’ll do it later. How does a 12’er of your beer of choice sound? Can deliver to Xmas party.
Cross posting this a complete Trexbox setup for 200 series for sale in Charlotte for $2500:
SOLD - Charlotte NC/200 Series Trex Box Storage System/Price Drop
Helping list for a buddy who is not on here much. He traded in his 200 and dealer requested he remove and install third row seat. This is both drawers and the wings for a clean complete look. It is less than a year old with no defects. It also comes with not pictured a split cutting board and...
While looking at the trek box, My daughter just said I think I will buy that for my purple Land
Cruiser.
S O L D ! ! !
Found a great buyer willing to take on my poor, neglected 80. He has just joined ih8mud and the club and will finish the axle swap at my shop in a couple weeks.
Found a great buyer willing to take on my poor, neglected 80. He has just joined ih8mud and the club and will finish the axle swap at my shop in a couple weeks.
’97 FZJ80 For Sale.
I’m selling our FZJ80 40th edition I bought for our daughters to be their first car. You can see the evolution on the build thread
Builds - Mtbcoach's Livestrong II build...
Its time for me to make a build thread for my Livestrong II build, moving from the '07 GSJ15 to our '97 FZJ80. For those not familiar with my FJC build, check the link in my sig or this one, it might help understand how I don't really do things lightly...
The update would be getting the front axle and transfer case installed. As it sits now, half the axle swap we started 3/17 is done.
HAMOM request March 4
Request for HAMOM March 4th at my home in Cary. I'll provide food and beverages from start to finish, will have my smoker and grill hot and full, garage fridge filled with cold drinks. Send me a PM for address if you don't have it. HAMOM goal - perform axle & transfer case swap on my '97...
The good...
160k miles
Head rebuilt/magnafluxed/new head gasket/baselined all hoses
On Board Air mount and pulley installed (Great Lakes version)
Fresh cat/Magnaflow routed over frame
Front e-locker axle/knuckle rebuilt w/Aisin hubs/original Longfields/Yukon 4.10’s/hubs/calipers rebuilt
Rear axle stock (giving extra after swap to sell)
Rear e-locker axle rebuilt (need to finish e-brake/hub/calipers, install Yukon 4.10 gears, install onto truck)
OME J lift
OEM Snorkel
Michelin XL 9.00R16’s (4 near new, spare used) 36.5 x 9’s
HF1A transfer case rebuilt with Marlin 3.12 low gear (HF1A does not have viscous coupler)
HF2A transfer case take out
Rebuilt driveshafts (rear lengthened to account for above transfer case w/o viscous couple nose cone)
Fender flare delete, holes welded/primed
Slee Short bus bumper front w/Warn 9.5k w/synthetic
4x4 Labs rear w/custom gas can/cooler/fridge-freezer basket/tire carrier/Hi-lift mount
Interior has fresh leather 1st and 2nd row, 3rd row in very good shape (with heated seat inserts installed but not wired)
Interior stripped and sprayed with Lizard Skin Ceramic (not roof)
LED interior light kit including dash lights
Double DIN Kenwood w/Garmin GPS (surely software is outdated)
The bad...
Half the axle swap done. I don’t have the energy nor resources to finish. Interior panels out prepping for wiring speakers/cb/antennas/etc.
Needs fresh fuel and battery to fire, install rear driveshaft and drive away in 2wd
Finish axle swap, install both shafts and away you go.
$12k takes all things related to this rig for a new buyer to finish and enjoy.
View attachment 2114559View attachment 2114564View attachment 2114565View attachment 2114566
Price changed to $1800.
1990 Toyota Pickup 4x4 DLX with 3VZE, approx 224K, 5 speed - owned since 2015 - pics - not the best, can take others if wanted. Bumper stickers included for free.........
I don't need anymore, have put on approx 3k in the last 4 years around the property and trips around the area. Located in Boone.
Rust on bottom tailgate and top of wheel wells - will add pics once I take them. Spent most of it's life in CA, TN and AR outside of the rust belt prior to 2011, one owner before me - well one owner family. Needs emergency brake cable front portion replaced and tailpipe broke off - have parts but don't plan on installing/repairing.
Century truck cap with Yakima mounting brackets
4 Runner SR5 Bucket seats (driver side fabric worn/torn)
Hella headlights with custom wire harness upgrade
General Grabber AT2 tires in 235/75R15 on stock rims
Warn locking hubs
New since 2011, by PO, receipts for all:
Timing belt with tensioner / idler bearings / water pump
Belts / Hoses
Valve cover gaskets
Professionally undercoated
Front brakes / calipers / hard and soft lines
Bilstein shocks (2015)
Marlin Crawler shifter bushings
Limited slip installed from a 2nd generation Toyota Supra
Rust on bottom tailgate and top of rear wheel wells - will add pics once I take them. Spent most of it's life in CA, TN and AR outside of the rust belt. Clear coat is gone on a large portion of the truck and cap. Hasn't been out on the salted roads this season as of yet....
1990 Toyota Pickup 4x4 DLX with 3VZE, approx 224K, 5 speed - owned since 2015 - pics - not the best, can take others if wanted. Bumper stickers included for free.........
I don't need anymore, have put on approx 3k in the last 4 years around the property and trips around the area. Located in Boone.
Rust on bottom tailgate and top of wheel wells - will add pics once I take them. Spent most of it's life in CA, TN and AR outside of the rust belt prior to 2011, one owner before me - well one owner family. Needs emergency brake cable front portion replaced and tailpipe broke off - have parts but don't plan on installing/repairing.
Century truck cap with Yakima mounting brackets
4 Runner SR5 Bucket seats (driver side fabric worn/torn)
Hella headlights with custom wire harness upgrade
General Grabber AT2 tires in 235/75R15 on stock rims
Warn locking hubs
New since 2011, by PO, receipts for all:
Timing belt with tensioner / idler bearings / water pump
Belts / Hoses
Valve cover gaskets
Professionally undercoated
Front brakes / calipers / hard and soft lines
Bilstein shocks (2015)
Marlin Crawler shifter bushings
Limited slip installed from a 2nd generation Toyota Supra
Rust on bottom tailgate and top of rear wheel wells - will add pics once I take them. Spent most of it's life in CA, TN and AR outside of the rust belt. Clear coat is gone on a large portion of the truck and cap. Hasn't been out on the salted roads this season as of yet....
Last edited:
