- Thread starter
- #41
Awesome, thanks. I gotta take a lookI have a butt-load of heater stuff listed. They are OEM.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Awesome, thanks. I gotta take a lookI have a butt-load of heater stuff listed. They are OEM.
Thanks for the info. Mine does have the two seams on the top, but I'd have to look at the windows to see if they are sown in.If you look at the oem top, it has two seams that run down the top, and the windows are not sewn in. I’m not an expert, but have had a dozen or so Fst bows and tops over the years, and these are my observations. This should not take anything away from this top, it is very well done. Glws.
I already have an AC unit under the dash, but no heat. Here are some photosCan you show us pictures of the interior/dash? If you have the correct duct for the AC box under the dash then you have the most difficult part to find already.
I already have an AC unit under the dash, but no heat. Here are some photosCan you show us pictures of the interior/dash? If you have the correct duct for the AC box under the dash then you have the most difficult part to find already.
I already have an AC unit under the dash, but no heat. Here are some photosCan you show us pictures of the interior/dash? If you have the correct duct for the AC box under the dash then you have the most difficult part to find already.
That is interesting to me. Do you have a shop I could stop by?That’s an aftermarket setup. I have an extra OEM AC setup for a left hand drive truck. Might be able to source the correct right hand parts I’m missing but I don’t know how difficult it will be. The center console heater I have should work.
Mine is definitely different than these. Mine has flaps over the zippers. Are these the soft tops that would have been on a 1982?Here are a couple factory Toyota brochure pics. The top seams run from front to rear, not from side to side. Also the vinyl windows are heat stiched. No flaps over the zippers as well.View attachment 2537080View attachment 2537081
12 volt, (i hope. I just put a 12 volt starter in it).I’m just a bit of a parts hoarder. I don’t have a cruiser shop/business. I have spare bits from having owned a few different 40-series over the years.
Can you tell me if your truck is 12 volt or 24? I’m guessing it’s 12 volt but if you take a photo of the engine compartment I’ll know for sure.
12 volt, (i hope. I just put a 12 volt starter
let me ask about something that is a bit more pressing, but maybe related. How do I get windshield defrost?Okay, 12 volts... So, I have a 24 volt center console heater. I can convert it to a 12 volt setup with parts from a domestic fj60.
He's great to deal with by the way. That is a beautiful top, repro or not. Good luck selling it, I'd buy it if I wasn't just a lowly stableboy.Awesome, thanks. I gotta take a look