OEM Brake Caliper Clarification Needed (Loaded vs. Unloaded)

[Kernal]

Bright Zinc plated (silver)

 

[GOTLOCKED96]

Mine are silver as well. Came with all new bolts and fittings. Just drop in pads and bolt on.

Descriptionisc Brake Caliper (Right, Front)
Part Number: 4773060061
Quantity:1
Price:$153.28
Descriptionisc Brake Caliper (Right, Rear)
Part Number: 4773060110
Quantity:1
Price:$154.79
Descriptionisc Brake Caliper (Left)
Part Number: 4775060061
Quantity:1
Price:$153.28
Descriptionisc Brake Caliper (Left, Rear)
Part Number: 4775060110
Quantity:1
Price:$154.79

 

[GOTLOCKED96]

Everything you want to know about calipers from CDan

Caliper Part Numbers?

I'm looking for the Toyota part numbers for remanufactured front and rear calipers. Late '93 with ABS. They seem to be the parts that no-one outside of USA can find on their system. Joinerman over the pond

forum.ih8mud.com

 

[Dissent]

Great feedback, thanks!

 

[Dissent]

For the record, my new front calipers came with the seals and pistons as well as the pins, clip and bleed screw. The finish was bright aluminum. I installed them as-is. The rears were the same bright aluminum finish with the seals, pistons and bleed screw included. I only had to add pads and associated retainer and wear clips along with new banjo bolts and copper washers.

 

[NATacoCruiser]

For the record, my new front calipers came with the seals and pistons as well as the pins, clip and bleed screw. The finish was bright aluminum. I installed them as-is. The rears were the same bright aluminum finish with the seals, pistons and bleed screw included. I only had to add pads and associated retainer and wear clips along with new banjo bolts and copper washers.

Hi. Do you have the part numbers for the associated retainer and wear clips along with new banjo bolts and copper washers? I am replacing my front calipers with OEM. Thanks!

 

[greentruck]

I think the banjo bolt is same all around and it is 90401-10015.

 

[Dissent]

Hi. Do you have the part numbers for the associated retainer and wear clips along with new banjo bolts and copper washers? I am replacing my front calipers with OEM. Thanks!

Great decision, here you go. Quantities are for the whole truck, divide in half for each axle.

High Pressure Banjo Bolts (Qty. 4):
90401-10015

High Pressure Copper Washers (Qty. 8):
90430-10074

Spring Clip Retainer (Qty. 4)
90468-12015

Shim Kits - Anti-Squeal (Qty. 1):
Front - 04945-04012
Rear - 04946-60010

Fitting Kits - Wear Indicators (Qty. 1):
Front - 04947-60090
Rear - 04947-22050

 

[NATacoCruiser]

Great decision, here you go. Quantities are for the whole truck, divide in half for each axle.

High Pressure Banjo Bolts (Qty. 4):
90401-10015

High Pressure Copper Washers (Qty. 8):
90430-10074

Spring Clip Retainer (Qty. 4)
90468-12015

Shim Kits - Anti-Squeal (Qty. 1):
Front - 04945-04012
Rear - 04946-60010

Fitting Kits - Wear Indicators (Qty. 1):
Front - 04947-60090
Rear - 04947-22050

Thank you!