Bad Coco
GOLD Star
Well I'm almost ready to fire Poo Flinger up. I'm needing to get all the vac lines put in. The engine is a 1/75 2F and the carb is a 4/76 stock carb rebuilt by Mark A. It has no smog equipment on it, including air rails.
The dizzy is vac advance DUI.
I'm wanting to powder coat the air cleaner, but I'm hoping to seal of unneeded vac ports first to clean it up a bit.
The PCV valve is on the push rod cover and there is a large port on top of the valve cover, which I think is also a vac port.
I'm hoping to find out what the lines go to and wheather the lines need vac from the carb, intake, air cleaner or if it even matters. I have 0 experience with this and thank everyone in advance for the help.
I will refer to them from the top down as 1, 2, 3, etc.
The dizzy is vac advance DUI.
I'm wanting to powder coat the air cleaner, but I'm hoping to seal of unneeded vac ports first to clean it up a bit.
The PCV valve is on the push rod cover and there is a large port on top of the valve cover, which I think is also a vac port.
I'm hoping to find out what the lines go to and wheather the lines need vac from the carb, intake, air cleaner or if it even matters. I have 0 experience with this and thank everyone in advance for the help.
I will refer to them from the top down as 1, 2, 3, etc.