moto metal 16x9?

[jonukem]

hey, i am thinking about putting some moto metal black 951 16x9 wheels on my 78 fj40. will these work? do i need back spacing? what about the center hole will it fit over the hub?

 

[BELMONT148]

How would we know? What is the backspacing and center hole diameter?

Jeremy

 

[e rock]

do i need back spacing?

I guess technically, no. But it might be tough to find wheels without some.

 

[camcruiser13]

you got more specs on the wheels?
lots of options and asking a broad question will get you ,,,, well some broad answers

 

[jonukem]

i was asking mainly about the center hole because i had heard that the hole on the wheel starts out large and tampers down to a smaller diameter. and that if may not work on a vehicle with manual locking hubs

 

[e rock]

Oh jeez.


16x9, 6 on 5.5 /Bolt Pattern
Back Spacing = 4.53 inch
Offset = -12 mm.
Hub Bore = 108mm
Finish = Black

The backspacing isn't going to work without some spacers (like 1"). The little hub covers (obviously) aren't going to work on the front axle.