I cant see to find a replacement metal brake tube for my 77 40, everywhere is saying it's discontinued. What size is this tube so I can make one?
77 fj40 metal clutch tube
- Thread starter 77ToyFJ40
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Stainless flex hose $30 clutch
www.sor.com
after market brake line $60 each #35,36
www.sor.com
My new clutch master/slave came with the SS flex hose. Seems to work fine. The rubber part was OEM, I think the steel section is around here some where.
1960-8/87 FJ40, FJ45, FJ55 and FJ60 Land Cruiser - Clutch Lines and Pedal Assembly for Gasoline and Diesel Models - Specter Off-Road
Toyota Land Cruiser parts since 1983. From the oldest FJ25 and to the newest Land Cruiser, Non USA or domestic 40 Series, 60 Series 80 Series or 100 Series, SOR has the largest selection of top quality new and used OEM and aftermarket Land Cruiser parts in stock in the world. Specializing in...
after market brake line $60 each #35,36
FJ40, FJ45 and FJ55 Series Front and Rear Brake Lines and Hoses, 1958-1984 Land Cruisers - Specter Off-Road
Toyota Land Cruiser parts since 1983. From the oldest FJ25 and to the newest Land Cruiser, Non USA or domestic 40 Series, 60 Series 80 Series or 100 Series, SOR has the largest selection of top quality new and used OEM and aftermarket Land Cruiser parts in stock in the world. Specializing in...
My new clutch master/slave came with the SS flex hose. Seems to work fine. The rubber part was OEM, I think the steel section is around here some where.
I can't help you out, but for the benefit of those who can, are you looking for a clutch or brake tube? I could be just old and confused.
- Thread starter
- #4
What I meant to say was I need the size of the clutch tube on my 77 fj40. They are discontinued apparently. I need to make one to replace mine.
mattressking
10 digits to freedom
3/16 Nicopp for easy bending and two brake line fittings (10mm) from the junkyard or spare broken lines - then flare and install.
Or find someone parting out a truck and take the line - very low desirability when parting out for those.
Or find someone parting out a truck and take the line - very low desirability when parting out for those.
pb4ugo
SILVER Star
3/16 ni-copp, you might be able to use your old fittings or buy a section long enuff at the a/p store. Always double flare the ends.
