Builds Mission Impossible......My 74 & 76 Build up by a Top Gun Land Cruiser builder :)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

ok... well you have seen my new rims and tires... well I could not wait to get them on and see how they looked... even though I knew I would be taking them off again soon to do the brakes I put my tires on.... man do they look cool.... I am so happy with what they look like... they look so cool... My girl friend finally came into my shop to look at what I have been working on every night.... got to say she was impressed.... (but she called me a grease monkey) :grinpimp: I call myself a grease monkey in training!!!:flipoff2:

Check these out... but for the record they look way better in person... stop over for a :beer:
IMG_1172.webp
IMG_1174.webp
IMG_1175.webp
 
ok... well had a cocktail and hung out with my Gf for a while.... she is leaving for the weekend so we went out to dinner.... after that got a few things ready for my rear brake disc. conversion... I told you I painted my loaded calipers.. I still am not too happy with how they turned out... glad they are just calipers and not something anyone will look at often..

you will see my brackets I got from Poser... I did put a few coats of black paint on them, they come with all the hardware needed to install.. I got my rotors from Poser also... they are the same chevy rotors but the centers have been machined out to allow for the larger Landcruiser axel.. again Poser did this maching work for me also....
here are the parts... I want to have this mod done soon... pics will come as I do the mod...
IMG_1177.webp
IMG_1180.webp
 
Last edited:
that was kinda fun lookin at all those build pictures. looks like you are doing a very nice job, im excited to see how it finishes up
 
well started doing my rear brakes today... it started out going alright... It was kind of a bitch to take off the rear of the drum... ended up cutting it off with a sawzall.... anyhow got the bracket on there and then put the caliper on.. pretty straight forward... put the wheel on and this is where it started getting s***ty... the wheel was hitting the caliper... ended up calling Poser (three times... thanks man!!) well he told me to put washers behind the wheel to try to figure out how much of a spacer I would need with the wheel that I have...... I ordered a wheel with 2.5" back spacing for this reason, so I would not have to deal with this... Poser said he has never seen a wheel that needs more than a 1/4 spacer to work... I am wondering if the wheel I got sent to me is not 2.5" back spacing and it is wrong all together... It is easy to see where the wheel is hitting the caliper because of the red paint...

what does everone think....

ok so I ended my day here at my girl friends house. I am watching her dog again as she is out of town on business and I was putting the pizza box in the ref. and I ended up spilling a pickle jar in her fridge (wonder who did not put the lid on tight, sure it was me, so I am not about to point fingers :D )...... Man I was pissed... so I have spent the last half and hour cleaning her fridge.... dont know if I got it all... if my posts stop suddenly, you know... some one please call my mom, tell her I loved her... and for god sakes finish this truck!!!! :D

Here are the pics
IMG_1187.webp
IMG_1190.webp
IMG_1194.webp
 
few of the wheel.... Talked again to Poser and he thinks we are going to have to for sure put longer wheel studs on there...
IMG_1206.webp
IMG_1201.webp
IMG_1202.webp
 
TRESSEH said:
very nice. Poser needs to move to the northeast, you guys have all the good stuff;). keep up the good work.
Click to expand...


sorry... hope he stays a MN boy.... we need him here... all we got are Poser, lakes and the Vikings... and you saw their season this year... :D
 
Last edited:
YOU KEEP DOING A GREAT JOB AND KEEP GETTING INFO FROM HIM AND I WILL KEEP LEARNING AND PICKING EVERYONES BRAIN. IF THIS SITE WAS NOT HERE. I WOULD NEVER HAVE KEPT MINE. I AM ABOUT 3 STEPS BEHIND YOU. THANKS, THE INFO COMMING.:cheers:
 
TRESSEH said:
YOU KEEP DOING A GREAT JOB AND KEEP GETTING INFO FROM HIM AND I WILL KEEP LEARNING AND PICKING EVERYONES BRAIN. IF THIS SITE WAS NOT HERE. I WOULD NEVER HAVE KEPT MINE. I AM ABOUT 3 STEPS BEHIND YOU. THANKS, THE INFO COMMING.:cheers:
Click to expand...


three steps behind me.... where the hell are all your pics?????
 
MOUNTAINCRUISER said:
looks like your having the same problems with the rubbing as I had....but I only needed a 1/4 spacer ....

I like the new red pinstriping on those rims! Whered you take it to get that done? :flipoff2:
Click to expand...

lol!!!! yea the other side went on way better... I picked up some spacers today but ofcourse they did not fit.... but 1/4 will work fine... my old pal Poser said he has a set for me... so guess I will pick those up when I am down there next time
 
worked about 9 hours today... got a late start as I always go have breakfast at my Grandparents house on saturday morning so started early this morning and took the breakfast break and was back out about noon... finish putting the rear brakes on... like I said I picked up some spacers.... but they were wrong.. as of now I just have washer on there... but they seem to work well with 1/4" spacer.
IMG_1212.webp
IMG_1215.webp
IMG_1218.webp
 
so on the way home I stopped at the body shop supply store and picked up some 1500 and 2000 grit sand paper so I can wet sand my dash... I wanted to do this before I started putting things together so it would be just done.. spent about 2 hours doing this... it came out ok... only had one spot where I kind of wore through the paint... I was kind of pissed at myself because I was being really carful but it is not too bad and not enough to make me want to paint it again... over all it turned out fairly well... all the orange peel is gone on all parts you will see after everything is put back on... here is a pic even though it kind of looks like it did before in pics... but it is way different..
IMG_1220.webp
 
Last edited:
I put the cowl up and got it all set on the frame... I used rope to brace it at first until I got the steering wheel and steering box bolted up.. I sanded down the stearing colum and put a fresh coat of paint on it before I started getting the cowl ready so it would be dry enough for me to get set up when I was ready...

I also painted my glove box and speedo pewder color that I bought from JTO I was happy with how it went on and it did look very close to the original... close enough for me... I seem to have misplaced my ash tray or I would have painted that also... I will check in the other shop in the moring... that needs to be blasted a bit in the blast cabinet before that can be painted however...

I also painted my brake, clutch, and gas peddles.... and also my brake booster... these should be ready to go up and on in the moring... going to be watching the super bowl tomorrow so dont know how much I will get done... probably for sure try to put that stuff on and then clean up my shop.... it is a mess...

here are the pics
IMG_1223.webp
IMG_1229.webp
IMG_1228.webp
 
You must log in or register to reply here.

Similar threads

nikramos
My 76
Replies
5
Views
1K
nikramos
nikramos
Fj60+
73' FJ40...My slow build up/tear down.
Replies
0
Views
461
Fj60+
Fj60+
Cherrick
Touch up paint? ‘74 FJ40
Replies
2
Views
898
Pighead
Pighead
Rider4
Ray, a 76 FJ40 Build
Replies
13
Views
2K
Rider4
Rider4

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom