Metal Tech Tube Fender Kit and Safari Snorkel (?)

Josey1972

SILVER Star
Joined
Oct 28, 2016
Messages
778
Location
Indiana
Is there anyone out there that would know if a Safari Snorkel will work on a 40 with the Metal Tech tube fender kit? You have to trim up the portion of the fender where the Land Cruiser badge is To do the tube fender kit. I know the cut will work but now sure if the body of the snorkel will fit. I’m hoping someone has done this before or knows someone who has.


4FB445D0-C4B1-47A4-9DA5-E66A7DD62AB9.jpeg


6287877F-DDA7-4458-BF7A-C36900564F4C.jpeg
 
Joined
Mar 16, 2004
Messages
634
Location
Seekonk, MA
It is going to depend on how the fenders were installed and how much room is left. You can put the tube fender at the stock height or all the way up to the hood if you want.
 

Josey1972

SILVER Star
Joined
Oct 28, 2016
Messages
778
Location
Indiana
It is going to depend on how the fenders were installed and how much room is left. You can put the tube fender at the stock height or all the way up to the hood if you want.
Ok, thanks for that information. The previous owner installed the kit so I wasnt aware of that. It looks like I’ll need to order one and if it doesnt look like it will work then I’ll send it back.
 

Users who are viewing this thread

Top Bottom