Metal-Tech 2019 GROUP BUY for Bumpers and Sliders!

[Slashzero]

View attachment 1970663
Already pulled the running boards off - ready!

LOL! Me too!

Mine are scheduled for delivery tomorrow (Tuesday).

Still need to paint them, then clean up and treat surface rust on my frame, before I install them. Plus I still have the front passenger bracket from the running boards to get off.

We have a large number of sliders shipping today for those who ordered early. We are well past the number needed so everyone is now 15% off. (all checkouts now will show 10% but the difference will be refunded after the sale ends on the 15th) Sooo close to hitting the 50 and everyone getting $100 in shipping credits.

How close, @helocat?!

 

[helocat]

How close, @helocat?!

Group buy as of right now is at:

Just 6 orders away from hitting $100 shipping credits for everyone!


For orders shipping from stock, we have 8 sets of raw and about the same for Powder Coated 100 series sliders in stock. Once they go out of stock pepole can still order, it will just take upwards of 10+ weeks for raw and 12-14 weeks for powder coated before they can ship.

 

[Captndcoke]

How does shipping credit works? Like does the final charge be adjusted later or do we get a voucher of $100 for shipping credit that should be used/applied for future purchases?

 

[Drogon]

I would consider ordering. Do you have any that can be fully plated for using as a step? My wife will appreciate the step option if you do, and a selling point for me then...lol
How does your powder coating hold up to the winter chemicals used on the roads? Should I coat them differently for this?

 

[PhillipB]

For what I believe is my very first post, I ordered a raw set... better go work some OT now! Very excited, though.

 

[helocat]

How does shipping credit works? Like does the final charge be adjusted later or do we get a voucher of $100 for shipping credit that should be used/applied for future purchases?

The code will give you 10% right off the bat. This due to the GB starting at 10%. After 20 orders the discount goes to 15%, and if (more like when) we hit 50 orders everyone gets a $100 shipping discount.

When you buy the code is set to 10%. At the end of the sale, (Ends May 15th) we then go back and edit each persons purchase and refund their payment method the difference.

Example:

Raw set of hundo siders $709.95 regular price.

Order: Use code GROUPBUY19 and they are $638.95 + say (this is different per person) $123 for shipping.

Sale ends and we have hit 15% and $100 shipping credits.

This order is adjusted, not just 5% but 15% from the regular price. So $709.95 sliders are now $603.46! The purchase difference is $35.49 + the now $100 shipping credit. So $135.49 is credited back on the person card.

This person ends up with what would normally be an $832.95 purchase, for $626.46 delivered!

I would consider ordering. Do you have any that can be fully plated for using as a step? My wife will appreciate the step option if you do, and a selling point for me then...lol
How does your powder coating hold up to the winter chemicals used on the roads? Should I coat them differently for this?

We don't do a fully plated version, however, the 100 series sliders have step plates in the two areas you step. They are constantly used as steps as designed and built. If you get them raw and feel you want to add this you can have a local welder easily add fill "mesh" with expanded metal. We used to do them this way as an option years go, they look good. However, in the end, it's not really needed for most users. Some also prefer the clean look with just the two dimple die pressed plates.

A selling point for a wife is they protect your doors from dings in parking lots too. One good door ding = the price for sliders. + the sliders bite back to inconsiderate people hitting your truck, they end up with little radius dents on the edge of their doors.

Powder Coating: Metal-tech 4x4 always suggests getting sliders raw and finishing locally. We only offer pre-powder coated as we have demand from people wanting them 100% ready to bolt on. We have to use a vendor for powder, we try to have the best done we can but it's not in our control.

For what I believe is my very first post, I ordered a raw set... better go work some OT now! Very excited, though.

PhilipB - Welcome to the board and thank you for your purchase! MUD is more than killer group buys so be sure to look around and ask questions for your truck. I may have a low post count overall but was on here back when Woody set this up with the "cruiser support network". he he he back in the day!

 

[PhillipB]

PhilipB - Welcome to the board and thank you for your purchase! MUD is more than killer group buys so be sure to look around and ask questions for your truck. I may have a low post count overall but was on here back when Woody set this up with the "cruiser support network". he he he back in the day!

Thanks! And the board has been extremely helpful to me. I’ve just been lurking for a while now.

 

[CorporalClegg]

+1 more ordered

 

[DRANGED]

The code will give you 10% right off the bat. This due to the GB starting at 10%. After 20 orders the discount goes to 15%, and if (more like when) we hit 50 orders everyone gets a $100 shipping discount.

When you buy the code is set to 10%. At the end of the sale, (Ends May 15th) we then go back and edit each persons purchase and refund their payment method the difference.

Example:

Raw set of hundo siders $709.95 regular price.

Order: Use code GROUPBUY19 and they are $638.95 + say (this is different per person) $123 for shipping.

Sale ends and we have hit 15% and $100 shipping credits.

This order is adjusted, not just 5% but 15% from the regular price. So $709.95 sliders are now $603.46! The purchase difference is $35.49 + the now $100 shipping credit. So $135.49 is credited back on the person card.

This person ends up with what would normally be an $832.95 purchase, for $626.46 delivered!



We don't do a fully plated version, however, the 100 series sliders have step plates in the two areas you step. They are constantly used as steps as designed and built. If you get them raw and feel you want to add this you can have a local welder easily add fill "mesh" with expanded metal. We used to do them this way as an option years go, they look good. However, in the end, it's not really needed for most users. Some also prefer the clean look with just the two dimple die pressed plates.

A selling point for a wife is they protect your doors from dings in parking lots too. One good door ding = the price for sliders. + the sliders bite back to inconsiderate people hitting your truck, they end up with little radius dents on the edge of their doors.

Powder Coating: Metal-tech 4x4 always suggests getting sliders raw and finishing locally. We only offer pre-powder coated as we have demand from people wanting them 100% ready to bolt on. We have to use a vendor for powder, we try to have the best done we can but it's not in our control.



PhilipB - Welcome to the board and thank you for your purchase! MUD is more than killer group buys so be sure to look around and ask questions for your truck.

Killer!
Mark has been quick to respond to PMs and informative.
I know you (@helocat) said a couple pages back, but to consolidate here, can you restate the protocol for in-store pick-up?
Does the customer enter address info then put 'WILL CALL' in a notes section?
Then the $100 shipping credit will later be applied as a credit on future order(s)?

Thanks dude!

 

[tms070]

I ordered them a week ago and picked them up today from the shipping terminal in Kansas City. Hope to get them on this weekend.
I will also echo that Mark and his team at MT have been really helpful and responsive.

 

[helocat]

Killer!
Mark has been quick to respond to PMs and I formative.
I know you (@helocat) said a couple pages back, but to consolidate here, can you restate the protocol for in-store pick-up?
Does the customer put in address info, then out WILL CALL in a notes section?
Then the $100 shipping credit will later be applied as a credit on future order(s)?

Thanks dude!

If someone wants to pick up their sliders or bumpers at our Oregon location (our only location but that sounds more impressive), just chose "In-store pickup" at check out. You will not be billed anything for shipping. We do ask you be able to pick up your order in a reasonable time frame as we do not have the space to stockpile sliders/bumpers for months on end.

All In-store pickup orders, after they are picked up, will be issued a $100 MT discount code they can use for a future order.

 

[DRANGED]

Boxed GX470 Powder coated sliders for stock (we have raw ones too). On the shelf behind them, you can see one of the 6 pallets of raw 100 Series sliders for stock. All welded by Andy and Dustin over the past months. Packed by Mickie and Cory. We actually do make these things by hand in our shop here in Oregon.

View attachment 1969421

Doh... No more raw for GX470. . .
There goes my in-store pick up next month . . . Or does it?
I'll be in S Or the last 2 weeks in June. I plan to submit my order tonight or tomorrow.

 

[KraziAzn]

Ahhh too bad there are no bumpers.

 

[helocat]

I ordered them a week ago and picked them up today from the shipping terminal in Kansas City. Hope to get them on this weekend.
I will also echo that Mark and his team at MT have been really helpful and responsive.

Thanks, man! I think you were order #1.

Doh... No more raw for GX470. . .
Thwere goes my in-store pick up next month .

Still, 15% off Powder Coated GX470.... and those are in stock right now. I will check with our production team and see where we are at on the next run of raw GX sliders.

****UPDATE: GX470 sliders are on the welding table now. This run will be done on the 15th of this month. ******

 

[helocat]

Ahhh too bad there are no bumpers.

Yet.

 

[snowwjob1]

I broke they are ordered

 

[Somebodyelse5]

@medtro @knewstance
I’m tempted to pick up a set for the 80 instead of fabbing them...

 

[Drogon]

The MT sliders are priced initially at $879.95 before the group buy. Does this price include powder coating?

 

[Alibaster]

The MT sliders are priced initially at $879.95 before the group buy. Does this price include powder coating?

Metal-tech 4x4 UZJ 100 Series Land Cruisers/Lexus LX470 sliders.
Metal-tech sliders provide the best protection for your 100 Series Land Cruiser/LX470 while maintaining a functional step. These sliders have been designed to provide the most ground clearance that also provides a kick out to keep your quarter panels dent free.

100 Series sliders are made using 2x4x.188 rectangular tube as the main slider body, 1.5x3x.25 rectangular tube for support legs, custom laser cut and CNC formed mounting feet made out of 1/4" that not only acts as a gusset but as a mounting pad for our custom u-bolt to provide the least amount of movement.

Our rub rails are made out of 1.75x.120 wall DOM SRA tube as standard. Another unique feature of these 100 Series Land Cruiser sliders is a structural gusset that is made out of 1/8" plate and dimple died for superior weight distribution and reinforcement.

These sliders are a complete bolt on armor solution and are powder coated black for a long service life.

Package includes:

• Left & Right powder coated sliders
• Mounting Hardware

 

[aging fleet]

1 closer, thanks for fielding my questions today Mark.