looking for a free/cheep 16" wheel 4"ish BS. If it had a 33" tire(285/75/16) with fair/good tread that would be better yet.
Local For Sale/Wanted Section!
- Thread starter Wayneraintree
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
1994 Toyota Land Cruiser FOR CHEAP
no connection but looks like a sweet deal with a head gasket done.
bob
no connection but looks like a sweet deal with a head gasket done.
bob
OTT industries toyota/dana300 adapter
i have an OTT industries toyota to dana 300 adapter, bolts up to a toyota reduction box, it has a few different clockable positions(i'll check how many tonight), it is used, and includes a toyota reduction box and shifter with it, located in northumberland, pa 17857
$500
OTT Industries - the originals
i have an OTT industries toyota to dana 300 adapter, bolts up to a toyota reduction box, it has a few different clockable positions(i'll check how many tonight), it is used, and includes a toyota reduction box and shifter with it, located in northumberland, pa 17857
$500
OTT Industries - the originals
i have a 5 spd trans out of an 85 4runner, 141k, worked good when pulled, i think its a w56, its for a topshift tcase, located in northumberland, pa 17857, $175 obo
I'm selling a Green Locked 1994 FJ80 with a Kaymar rear bumper and a stout Iron Pig Skid plate. It comes complete with an OME Suspension (1" lift), a very nice leather interior, and 40th Anniversary rims in pristine condition. Truck runs great and everything works. If you're intrested let me know, looking for $4K - the axles are worth $2k alone - they were just completely rebuilt from the ground up by IPOR.
SOLD
SOLD
Last edited:
i've got a pair of warn premium locking hubs, fine spline, they're on a minitruck axle right now, i'll remove them and get some pics tonight, they are in very good condition, $100 plus shipping, located in northumberland, pa 17857
Sold pending payment!
traded!
Sold pending payment!
I'm on the lookout for an e-locker rear for my 88 truck and 5.29 gears or 5.29 assembled diffs for the front (straight axle) and back (V6 rear). If anyone has any or knows of any please post up, thanks.
interested in 4.88's?
if you end up buying new gears, performanceoffroadcenter.com has good prices, if you need them setup pm me
Various FJ40 Parts
I stopped by a neighbors house earlier today and he has some random parts he wants to get rid of. I don't have any detailed list but this is what I remember.
2 Sets of Aprons with emblems
2 or more gauge sets
2 rear corner windows
a near new Bestop soft top and doors - very nice; black with click door latches
front and rear heater
rear seats; need some love but they are wider than my 74's
center console with rear frame portion
Let me know if any of this sounds interesting and I'll get prices. He basically wants to dump it and is considering Craigslist if I don't get back to him. Location is Susquehanna County which is up in the northeast corner. It would probably be easiest to email me directly. I'd help with shipping and so forth if need be but I can also meet someone in Tunkhannock if I had to. PM me or drop an email if you are interested. madtripper at deadspacesociety.com
Tripper
I stopped by a neighbors house earlier today and he has some random parts he wants to get rid of. I don't have any detailed list but this is what I remember.
2 Sets of Aprons with emblems
2 or more gauge sets
2 rear corner windows
a near new Bestop soft top and doors - very nice; black with click door latches
front and rear heater
rear seats; need some love but they are wider than my 74's
center console with rear frame portion
Let me know if any of this sounds interesting and I'll get prices. He basically wants to dump it and is considering Craigslist if I don't get back to him. Location is Susquehanna County which is up in the northeast corner. It would probably be easiest to email me directly. I'd help with shipping and so forth if need be but I can also meet someone in Tunkhannock if I had to. PM me or drop an email if you are interested. madtripper at deadspacesociety.com
Tripper
caz
Keystone Cruisers
Any idea on the years and condition of the Aprons?
Thanks
CAZ
Thanks
CAZ
I think they are early - 9/73 aprons judging by the emblems. Easy blast and paint or just sand if you wanted. I'm quite sure they had no bondo, paint is worn, no noticeable rust.
Tripper
Tripper
I just remembered he had a nice windshield frame available as well. I'm waiting to find out what he is asking on a few items but perhaps over the holiday I can look further into it if anyone is interested.
Tripper
Tripper
Folks, I regretfully selling my 314, It has been converted to a dual circuit to run dirt/snow plow. It has non-JD cast weights and a set of chains with it. It just won't work for me. My drive is just to steep and I have a 300 for grass duty. The plow is in great shape and works well. The tractor smokes a bit on start up but pulls strong. It started every time in the summer, no issues. I did have to give it a shot of ether to get it started this winter. the left right on the H2 unit sometime stick and you have to pull both levers. I have all the parts to convert it back to a H1 if desired. There is no mower deck. The tires are old but good, one looses air in the cold. The seat is not original but I have a JD cover here you can have. Although the seat looks odd it it very comfy. It needs a grill and light cover, no tail lights?. There is no rot on it, it was however painted at some time and not the best job. Since the winter came the choke pull is a bit sticky. I used this tractor all summer to pull the cart and yard duty It runs and drives better than my 300
I'm asking $850 for the whole setup. I would consider selling just the plow for $500, the tractor for $400, weights and chains $100. But the tractor or the plow has to go before the weights and chains go. If you have any questions let me know. Locally I can help with delivery for some beer.
I'm in Pa 18707
thanks,
bob
I'm asking $850 for the whole setup. I would consider selling just the plow for $500, the tractor for $400, weights and chains $100. But the tractor or the plow has to go before the weights and chains go. If you have any questions let me know. Locally I can help with delivery for some beer.
I'm in Pa 18707
thanks,
bob
WTT: My ARB winch bumper for wheels/tires NJ
Hey guys, depending on what you have, I would trade my ARB for the right wheel/tire combo. Im looking for aggressive 33/34's on aluminum wheels. This would be a local deal as shipping would be rediculous on both ends. Im located in Central NJ but obviously would meet someone halfway within a reasonable distance. My bumper is in fine shape; no dents or scratches deeper than the paint, although I did drill a hole in it for my CB antenna (not shown). Sorry about the pic, IH8MUD!
Hey guys, depending on what you have, I would trade my ARB for the right wheel/tire combo. Im looking for aggressive 33/34's on aluminum wheels. This would be a local deal as shipping would be rediculous on both ends. Im located in Central NJ but obviously would meet someone halfway within a reasonable distance. My bumper is in fine shape; no dents or scratches deeper than the paint, although I did drill a hole in it for my CB antenna (not shown). Sorry about the pic, IH8MUD!
Last edited:
Is this still for sale??
Is this still for sale??
If so:
Where are you located?
Any pic's?
Thanks
Aaron
Is this still for sale??
If so:
Where are you located?
Any pic's?
Thanks
Aaron
M23TLC let me know if you have any interest in selling the ARB outright. I don't have any tires to trade.
caz
Keystone Cruisers
FJ40 at A-Z
A buddy of mine stopped by last night to tell me that there is a nearly complete 40 at A-Z in New Ringgold. He doesn't know anything about 40s but said from what he looked up on the internet it looked like a late 60s.
I really don't need anything (and don't want to freeze my butt off) and thought I would pass it on.
CAZ
A buddy of mine stopped by last night to tell me that there is a nearly complete 40 at A-Z in New Ringgold. He doesn't know anything about 40s but said from what he looked up on the internet it looked like a late 60s.
I really don't need anything (and don't want to freeze my butt off) and thought I would pass it on.
CAZ
I have an nv4500 with chevy 350 bellhousing and a toyota minitruck on the rear of it for sale. I get up to Gary's every so often as well as the desire to wheel Rausch Creek. I'm looking for $1800 for it...obo. The transmission was freshly rebuilt and has never even been bolted in...
Thanks!
bk
Thanks!
bk
i just came across this on craigslist, not mine, but figured someone might be interested, its a rusty 82 4wd minitruck for $200 -
82 toyota parts
82 toyota parts
Similar threads
