Local For Sale/Wanted Section! (1 Viewer)

[norville]

It's a long shot, but is there anybody in the area with a light car trailer. That either can let me borrow it for a few days or wants to go to philly and pick up a small car and deliver it to 18707 (about 75miles)??

The vehicle is a sunbeam alpine kinda like a mgb. I need to know asap or I'll have to pass on it.


Or maybe a tow dolly???


thanks,

bob

 

[zucruisers]

All,

I have 100' (5 approx 20' sticks) of 1-1/2" .120" DOM tubing for sale. I had originally purchased it 5 years ago to make an internal cage for my 4runner and never did! I will give a good deal on it based on current prices (not sure what they currently are!).

I also have a 1-1/2" die for a JD2 bender for sale/trade/borrow. I am looking for someone with a 1-3/4" or 2" die.

Thanks,
CAZ

pm me with what kind of price you have in mind for the tube

i have a lock-right for a toyota 8" v6 4-pin rear diff..this will also work in an fj80 hp front diff if you use the rear v6 ring gear carrier, it reuses the stock side gears - $200

toyota v6 full spool, i think its from marlin, with timken bearings, $150

located at 17857, i can ship them, meet at rausch creek sometime, or you can come pick them up

also willing to trade for an 8" v6 full detroit

lock-right and spool still available if anyone is interested

It's a long shot, but is there anybody in the area with a light car trailer. That either can let me borrow it for a few days or wants to go to philly and pick up a small car and deliver it to 18707 (about 75miles)??

The vehicle is a sunbeam alpine kinda like a mgb. I need to know asap or I'll have to pass on it.


Or maybe a tow dolly???


thanks,

bob

how big of a trailer do you need?...pm me some details, i could possibly pick the car up for you, but i cant do it for free;p

 

[norville]

zu, I sent you a pm

bob

 

[caz]

Cheap '82 FJ60

82 land cruiser fj 60

 

[norville]

Must Sell ASAP, 93 Toyota 4Runner, Quick sale w/ CASH

93 4runner

 

[norville]

not mine 83 PU with plow $1500



TOYOTA 1983 plow truck

 

[norville]

folks please keep an eye out for a toyota 2wd 5 spd trans. Late 70's to eary 80's. I need it for a project. I think it's w50 or t50.

thanks

bob

 

[caz]

Not sure what your project is, but a Supra transmission of similar vintage might be something to look into. They will take a 22R bellhousing.

ORN - Supra 5M-GE Engine Swap

CAZ

folks please keep an eye out for a toyota 2wd 5 spd trans. Late 70's to eary 80's. I need it for a project. I think it's w50 or t50.

thanks

bob

 

[norville]

CAZ, I think your correct. celica's and corolla's.

I want to make it work in this:

bob

 

[shmukster]

transmission

Bob- try my friend Jason Liskey- he has more than 60 Toy trucks, I'm sure he has a good tranny for you. he's very reasonable with pricing, too.

When (not if) you're ready to sell the Alpine let me know. Does it run? Gary

 

[norville]

Bob- try my friend Jason Liskey- he has more than 60 Toy trucks, I'm sure he has a good tranny for you. he's very reasonable with pricing, too.

When (not if) you're ready to sell the Alpine let me know. Does it run? Gary

I think we're cut from the same mold Gary.

Yes it runs. It was a stalled project. It has new paint but after 12yrs sitting has some boo-boos. All it really needs is a clean-up and the interior installed. very little rust, that was treated years ago. I'm hoping to have it out in the spring. Runs well, pretty peppy.

My other thought was folks are putting in 2.8 ford v6 and 5spd. keep the alpine handling and tiger power. Someone even makes a kit for it.


bob

 

[zucruisers]

im selling a 20' 7k lb trailer project, let me know if anyone is interested

https://forum.ih8mud.com/vehicles-trailers-sale-wanted/248199-20-7k-trailer.html

 

[zucruisers]

i have a set of fj40 driveshafts, from a late 72, pretty sure they need new ujoints, but are otherwise in usable condition, $50 for both of them, i can ship them if needed

also selling our 1983 minitruck, reg cab, long bed, 22r, 5spd, 99k miles
the frame on this truck is solid, the cab has some holes underneath, and the bed is fairly beat, but usable, suspension is all stock, it has 235/75 at's on it with about 1/4 tread, one has a slow leak, the trans and tcase arent in it right now, pulled them to put in a new clutch, but never got around to putting it back together, it has the new napa clutch kit with it, along with some new tune up parts, im sure the brakes are probably seized as its been sitting for awhile, there's a plastic bedliner in it, and the wheels are painted black, i have some other stock wheels that can go with it too, its not the cleanest truck there is but would make a great trail rig for someone, located in northumberland, pa 17857, i can deliver if needed, and i'll get some pics uploaded tonight or tomorrow, let me know if ya have any questions, $600

minitruck is sold, anyone need some fj40 driveshafts?

 

[zucruisers]

36" tsl/sx's on 6 lug beadlocks

i have 4, 36x12.5x15 sx's to sell, they have some rock rash from wheelin, 3 of them have about 1/3 tread, and one is almost full tread, all are custom grooved, the full tread tire has a slice in the side lugs, but it holds air and i've ran it without worrying about it at all, i also have a well worn 36" tsl radial on a 15x8, 4" bs 6 lug steel wheel for a spare

the sx's are mounted on 15x8 steel wagon wheels, 3" backspace, with 39 bolt ruff stuff specialties weld-on beadlocks, grade 8 bolts, wheels are painted white, rings are black, they all hold air fine

i'll get some pics of them tomorrow or friday, located in northumberland, pa 17857, i can deliver within a reasonable distance for a price, just pm me your address or zip code, $600 OBO, let me know if ya have any other questions, thanks -john

 

[jtaco1]

Depending on the pictures, I may be interested, was really looking for a set of 38's but these may work. Would you be interested in a trade for my 35" Goodyear MT/R's, two are new with only 3 wheeling trips on them, two with about 60-70% tread left, all on 15x8 Black Rockcrawler wheels with 3" BS.

 

[zucruisers]

Depending on the pictures, I may be interested, was really looking for a set of 38's but these may work. Would you be interested in a trade for my 35" Goodyear MT/R's, two are new with only 3 wheeling trips on them, two with about 60-70% tread left, all on 15x8 Black Rockcrawler wheels with 3" BS.

sorry man, i dont need any other tires...just trying to get rid of some stuff so i can start another project;p...i'll get some pics when i get home today

 

[zucruisers]

pics are here -

https://forum.ih8mud.com/sale-tires-wheels/249495-36-tsl-sxs-6-lug-beadlocks.html

 

[norville]

I know it's not a cruiser, but this is a sweet deal.

rmp-o.com :: View topic - 1966 Nissan Patrol reduced to sell soon $2500 in Maryland!


bob

 

[zucruisers]

i have 4, 36x12.5x15 sx's to sell, they have some rock rash from wheelin, 3 of them have about 1/3 tread, and one is almost full tread, all are custom grooved, the full tread tire has a slice in the side lugs, but it holds air and i've ran it without worrying about it at all, i also have a well worn 36" tsl radial on a 15x8, 4" bs 6 lug steel wheel for a spare

the sx's are mounted on 15x8 steel wagon wheels, 3" backspace, with 39 bolt ruff stuff specialties weld-on beadlocks, grade 8 bolts, wheels are painted white, rings are black, they all hold air fine

i'll get some pics of them tomorrow or friday, located in northumberland, pa 17857, i can deliver within a reasonable distance for a price, just pm me your address or zip code, $600 OBO, let me know if ya have any other questions, thanks -john

sx's and beadlocks are sold, hopefully the spare will be too soon

 

[norville]

Anybody have a tow bar for sale? Harbor freight has them for $65, but if someone local has one for sale please let me know 2"ball.

18707

bob