Let’s see your white 100 series!
- Thread starter sleepycruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Agreed!
275/75/18 - 33s
Prospeed roof rack. i had to remove 2 60/40 crossbars to allow the cargo box to mount up, but just enough space to crank down the Thule spin locks. this is the XL Xt force box
Tirerack.com is claiming 275/75/18 doesn't exist. You sure they're 275/75/18? Also, do they rub at all? I've never really liked the look of the LX until seeing it with those tires you have on it.
I was going for the roofrack more to throw on a lightbar like you have. I just liked how slim/conservative the roof rack you had was. Either way, it's good to know I can throw some storage up there if I ever need it.
Your finding is correct. I believe he meant to say 275/70/18 which is a hair taller than a 33, more like a 33.2.
A few pics from around the way.
Is that a oem stock bumper repainted?
you're right. 275/70/18.
yes, there is a slight rub on the protrusion in the liner from the pinch weld area.
i have 1k miles on this setup of mixed driving and the wear on the fender liner is not even noticeable, but its audible during parking lot turns. search "pinch weld mod" aka heat gun for the liner and BFH on the pinch weld behind it to flatten it out.
also, your speedo will read about 5mph slower with this tire size. check the tire size calculator for the exact amount. MPG difference is negligible in my experience so far. i was at 13-14 mpg before and after the jump to 33s.
This was an aftermarket bumper that came unpainted black.
White on white on white
I finally couldn't take it any longer! The glare off that expansive pearl white hood would often make my eyes tear up. After driving to Texas and Back for the Solar Eclipse, and fighting the rising sun going and the setting sun coming back to California... I took "Marshmallow" to the wrap shop down the street and had the hood covered in 3M 2080 Black Matrix wrap film. It is a long lasting, multi-layer very matte looking film with a slight texture to help with the light dispersion.
Before:
And after:
Drivers View:
Close-up of the 3M Black Matrix Film:
The above photos were taken right after the film was professionally applied. We'll see how it goes on my next trip to Overland Expo... We head out on Saturday. So far, I'm quite happy with the complete lack of reflection.
3M Black Matrix Wrap Film
Before:
And after:
Drivers View:
Close-up of the 3M Black Matrix Film:
The above photos were taken right after the film was professionally applied. We'll see how it goes on my next trip to Overland Expo... We head out on Saturday. So far, I'm quite happy with the complete lack of reflection.
3M Black Matrix Wrap Film
405
GOLD Star
My newly acquired ‘07 100 series. I absolutely love it! 160k miles and not a single squeak or rattle. The smoothest V8 I’ve ridden in!
Been awhile...
I spent much of my youth at Lake Eufaula. My Grandparents had a cabin at McKee Cove. Amazing memories.
Exiled
SILVER Star
the "8-Ball" got its quarterly deep wash the other day!
Great looking cruiser! Poverty pack vibes.
Bruh, you need to stop worrying about cleaning 8-ball and start worrying about straightening out that front license plate! It's wavy as hell!
Exiled
SILVER Star
I (kinda) did that on Sunday, with mixed results...
Did you purchase a sheet and cut the design yourself?
