justdifferentials bj73 build. coilovers toyota axle goodies.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Letsgomoreplaces

Gear & Axle parts for ALL Toyotas new or old...
SILVER Star
Joined
Jul 31, 2006
Threads
96
Messages
1,430
Location
Washington
Website
www.letsgomoreplaces.com
The full thread is over on the Landcruiser 70 series forum:
https://forum.ih8mud.com/70-series-...ject-inigo-87-bj73-landcruiser-lhd-spain.html

But here are some sneak peaks, so go check it out!
Well the 10+ year quest for a clean, rust free, removable top, mid wheelbase, Left hand drive, 70 series landcruiser has finally yielded us this fine beauty. With the help of Landcruiser 70 guru, Hugh of Safari LTD, we have the unicorn vehicle through JDMLandcruisers.com to start this long awaited project. Spain must be a great place to live if you are a BJ73, as this there is no rust, and even the original paint is in good shape. The "Mi Toyota Es Fantastico" decal on the rear window is the only modification so far, and it will stay! Our latest addition to the our "familia" of land cruisers will be named "Inigo" Montoya. For those that haven't seen princess bride

Stock vehicle specs:
1987 Toyota Land Cruiser BJ73 LX: Silver with white FRP top, original 80's multicolor decals, 3b diesel, full float Lsd rear axle, 5 spped mt, 24 volt, "Mi Toyota Es Fantastico" decal

Planned upgrades will be a multi purpose offroader and daily driver. Big tires, more power, etc, retaining and/or improving drive ability.

Planned upgrades:
-servicing of basic maintenance items, injectors, etc.
-Turbocharger for more power.
-Coilover front suspension via 3 link and panhard.
-Coilover rear suspension w 4 link
-80 series full float disc brake rear axle with Nitro custom 32 spline chromoly axles, 100 series type 4.88 Ring & Pinion, solid spacer, air actuated locker
- 80 series width hybrid 9.5" front axle Nitro 80 series chromoly birfield kit and custom 32 spline axles, Aisin hubs with chromoly hub gears, nitro 100 series type 4.88 Ring & Pinion set, solid spacer, air actuated locker
- upgraded crossdrilled cryo'd rotors
-37" tires on beadlock wheels
-3" lift height, custom fender work
- bumpers, sliders, winch
- HID headlight conversion, Rigid overhead light bar & duallys
- ARB twin compressor, air tank, 24v to 12v converter for stereo and aux
- much more
Attached Images

attachment.php
 
Last edited:
attachment.php

attachment.php


Turbo install Got the Turbo installed Friday.

The kit was sourced from Keith at Jefferson State Machining, he was quite knowledgable, and quick to return my call, and is in the USA. Price is good too, but I told him he should raise his price:)

Link to Toyota 3b Turbo kit

The kit was very nice and features:
-Garret GT Series Turbo
-Oil feed line w/ direct fitting, return line w/ weld in bung for oilpan
-13bt type reproduction Exhaust Manifold, gaskets
-Turbo to Manifold adapter plate.

Not included:
-12" piece of 2" exhaust
-3 bolt flange w/ flare to attach downpipe
-Exhaust
-Depending on your air cleaner tube, you may need to source a 2" 45 degree silicone connecter, and a 2.75-2.0" reducer and another roughly 12" chunk of 2" tube.

Install is pretty straight forward.
Before starting the job:
-check your oil filter, if it points up you will need a new adapter. Ours did, so we sourced the appropriate parts from Steven at EBI Cruisers in BC.
-I'd also suggest picking up a 2' chunk of 2" stainless exhaust pipe to use for the turbo-intake and the air cleaner-turbo
-I'd suggest bringing the turbo to an exhaust shop to have them fab a 3 bolt flared flange with a 90 deg bend and about a 16" downpipe so you can at least drive it to the exhaust shop when finished.

If you do these few things before hand, its no problem to do the job in 1 day.

Results were great. Turned up the fuel about 1/2 turn to stay on the safe side before gauges are in. I then drove about 150 miles accross the state to bring the vehicle to our good freind Luke at Hazzard Fabworks in Spokane,WA for some suspension & cage work. Luke has loads of experience with many high end, high profile vehicle builds and was the official fabricator of the 2012 Petersen's Ultimate Adventure.

More pics to come!
Attached Images
attachment.php
attachment.php
attachment.php
 
Project Inigo Update, axles are out, hangers removed, frame prepped for link bracketry. Luke having fun with a bit of tire mockup

Thinking the 37's look better than the 40's.

Photo gallery here:
http://www.facebook.com/media/set/?s...5564587&type=3

Attached Images
attachment.php
attachment.php
Diffs 80 Series rear axle housing stripped of factory brackets, getting ready for double triangulated 4 link and 12" coilovers in the rear. Lot of work cutting the brackets off, thanks Tacklebox!
Attached Images
attachment.php

Some Sliders, and a nice start on the front bumper.
Next up Warn XD9000 24 volt winch, Custom roll Cage! Attached Images
attachment.php
attachment.php
attachment.php

Big thanks to RuffStuff Specialties for getting the axle housing built for us under our tight deadline.

We really didn't want to use the 8" front on this project, so we cut the knuckle balls off to use on the new 9.5" Ruff stuff housing. The housing will except our off the shelf chromoly LC 80 axle kit. We will be using our new 32 spline chromoly Birfield kit and a 100 series style 3rd member and gears Attached Images
attachment.php
attachment.php
attachment.php
 
Parts list for custom 9.5" landcruiser axle

Custom built 80 series width 9.5" landcruiser frontends We have made a jig, and can offer these complete turnkey, as of now will also require a core 80 frontend for the knuckle balls etc, we can provide.

Parts list and price (today):

NPHTLC95HOS CUSTOM HD TOYOTA LC 9.5" AXLE HOUSING, NO BRACKETS OR ENDS, MUST SPECIFY LH, RH, OR CENTER DIFF, 3.5" TUBES $800

JTOTLC80-KNUCKLES FJ80 HI-STEER KIT WITH KNUCKLES, ARMS & BUNGS $900

AXTBIRF-FJ80KIT-32 NITRO HIGH STRENGTH CHROMOLY BIRFIELD AND AXLE KIT WITH CUSTOM 32 SPLINE INNERS $1099

TLC100-488-NG 98+ STYLE LANDCRUISER 4.88 RING & PINION, 29 SPLINE $449

YOKT35100-MULTI 29 SPLINE FLANGE $55

ARBRD152 98+ LC 9.5" REAR LOCKER, 32 SPLINE $996

MK TLC-B 91+ LANDCRUISER 9.5 MASTER KIT W/ KOYO $192

SK CSTLC-90+ LC 9.5 SOLID PRELOAD SPACER KIT

KNCLKIT-FJ80 LC 80 KNUCKLE REBUILD KIT $140

AK TOY-FRONT X2 FRONT WHEEL BEARINGS & SEALS $40 EA
Attached Images
attachment.php
attachment.php
attachment.php
 
Turns out the Synergy rear Jeep JK bumper was close in width, so we modified it a bit. Turned out to be more work than expected as we had to move the pivot and latch and widen the carrier. Next up is doing the links and axles & some Icon Vehicle Dynamics 2.5"x12" travel remote reservoir coilovers with compression adjusters. Hoping to have it done in time for a shakedown at Cruise Moab. Attached Images
attachment.php
attachment.php
attachment.php

coming along Attached Images
attachment.php
attachment.php
attachment.php

Hutchinson Rockmonster Beadlocks. 3 link w/ panhard & Hellfire knuckles / arms w OEM 80 series tie rod ends Attached Images
attachment.php
attachment.php
attachment.php


andcruiser BJ73 Top off and building Cage. Attached Images
attachment.php
attachment.php
attachment.php
 
BJ73 Landcruiser Coilovers 3 link & 4 link More suspension pics coming up
Attached Images
attachment.php
attachment.php
attachment.php
 
More suspension Attached Images
attachment.php
attachment.php
attachment.php



BJ73 Fuel tank skidplate Might as well do a fuel tank and oil pan skid plate. While we are at it lets do the 2006 Grill and turn signal lenses.
Attached Images
attachment.php
attachment.php
attachment.php

More photos Icon Vehicle Dynamics 2.5" x 12" travel Remote Reservoir Coilovers with compression adjusters - IN had to notch rear frame and wheel wells to outboard the coilovers.

PSC Hydro assist installed, all new brake lines run

Frame, skids, Links and axles painted

Dual Oddyssey group 65 batteries

lots lots more

Cage is at powdercoat


Coming along nicely, it's pretty much a driver. Should be taking first spin soon!
Attached Images
attachment.php
attachment.php
attachment.php

Looking naked with no top, cabrio hoop or cage Attached Images
attachment.php
attachment.php
attachment.php

BJ73 Rolling The Nitro Gear Land Cruiser BJ73 project "Inigo Montoya" is driving!
Attached Images
attachment.php
attachment.php
attachment.php
 
more pis

More suspension pics Attached Images
attachment.php
attachment.php
attachment.php

We used some 4.30 Ratio ring & Pinions. these are land cruiser 9.5" in the latest design and feature a 32 spline pinion. This could lead to some future offerings for other models. Attached Images
attachment.php
attachment.php
attachment.php
 
Pretty impressive, what did you do with the stock 70 axles?
 
You guys have Hi Steer 80 series knuckles in stock ..?

Bump for a fantastic Cruiser buildup .. ( please add more fuel and IC :D )
 

Users who are viewing this thread

Back
Top Bottom