The IPF lights on my rig set up by the previous owner are hooked up to 24 volts even though they are made for 12 volts. Time to fix that.
Talking with a friend who knows a lot more than me and he suggested that as one battery reads 12v and the other reads 24v, we could take a direct output from the battery that only has 12v to power the lights. Perhaps replacing the series battery connector to one with a Y for the 12v output.
I see everyone else using a 24v to 12v converter, but would this work in theory?
My apologies if it’s a dumb question, I tried researching but found no relevant answers.
Talking with a friend who knows a lot more than me and he suggested that as one battery reads 12v and the other reads 24v, we could take a direct output from the battery that only has 12v to power the lights. Perhaps replacing the series battery connector to one with a Y for the 12v output.
I see everyone else using a 24v to 12v converter, but would this work in theory?
My apologies if it’s a dumb question, I tried researching but found no relevant answers.