The emblems are like a cherry on top! It looks fantastic! Your's is one of my favorite cruisers!Thanks mate !
Finally got them arse emblims !!
Ready for tomorrow's Koeberg Nuclear plant test run
Builds Intro: Ugly Betty(so far) (1 Viewer)
- Thread starter tmarx
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hi Theo,
Thanks for the new pics and congrets on the addition to the family, he, Boris, looks like a playfull chap.
Thanks for the new pics and congrets on the addition to the family, he, Boris, looks like a playfull chap.
- Thread starter
- #363
It has been a long time since I have had some spare time to spend working on Olive. In prepping for the upcoming Turbo conversion I got an EGT guage. The one in my 105 is almost 5 years old so I decided to go with another MGL Avionics unit, for obvious reasons. Due to the fact that space is a premium in the 40 I went with the smaller TC1 unit. The kit included the K-type probe with wire.
In order to obtain accurate before and after figures, I decided to install the guage before even fitting the turbo.
Having drilled and tapped the stock manifold I routed the probe wire in such a way that I didn't need the extention piece that came in the kit. I also added some extra protection in the form of Plymouth tape etc ...
I made a new bracket for and relocated the VHF mic in order to fit the guage in the most visible& practical location while still being aestetically pleasing ...
The view from my normal driving position
I also decided that it was time to fit that EL wire instrument cluster upgrade
That EL wire is an awesome improvement indeed !
In order to obtain accurate before and after figures, I decided to install the guage before even fitting the turbo.
Having drilled and tapped the stock manifold I routed the probe wire in such a way that I didn't need the extention piece that came in the kit. I also added some extra protection in the form of Plymouth tape etc ...
I made a new bracket for and relocated the VHF mic in order to fit the guage in the most visible& practical location while still being aestetically pleasing ...
The view from my normal driving position
I also decided that it was time to fit that EL wire instrument cluster upgrade
That EL wire is an awesome improvement indeed !
Last edited:
Love your work!
Hey Theo, great to see an update! Absolutely superb engineering and thought into all of that!
Hey Theo, great to see an update! Absolutely superb engineering and thought into all of that!
crushers
post ho
sweet ...
1Fine40
Rust Buster
Would you mind telling us who manufactured those rims? Very nice and sturdy looking....are they actually beadlocks or just made to look like them?
Cheers!!
What a functional piece of art!!!
Cheers!!
What a functional piece of art!!!
- Thread starter
- #368
Don't mind at all. They are fully functional beadlocks made by my local Eng shop. A few of my buddies have them on their 80 series trucks. I have had my tyres down to .3 bar doing sharp turns in the dunes, without any problems at all. I actually think that the sidewalls on those 4 ply Baja tyres are a bit prohibitive.
Spose I will have to try .2 next ?
Spose I will have to try .2 next ?
- Thread starter
- #369
I recently fitted a turbo to Olive
and wanted to give her a testrun in varying driving conditions. A quick weekend trip to the Cederberg with my son fiited the bill perfectly. The pics tell the story ....
After arrival on Friday
On Saturday morning we had to leave early as we wanted to do the circular route around Clanwilliam, Wupperthal, Eselbank and back to Driehoek
The new lawnmowers getting the pitch ready ...
Our route in the distance ...
To scare the LR drivers
Lunch stop
As expected the waterfall has been reduced to a mere trickle
We got back early enough to go swim in the river
We returned via Ceres
and wanted to give her a testrun in varying driving conditions. A quick weekend trip to the Cederberg with my son fiited the bill perfectly. The pics tell the story ....
After arrival on Friday
On Saturday morning we had to leave early as we wanted to do the circular route around Clanwilliam, Wupperthal, Eselbank and back to Driehoek
The new lawnmowers getting the pitch ready ...
Our route in the distance ...
To scare the LR drivers
Lunch stop
As expected the waterfall has been reduced to a mere trickle
We got back early enough to go swim in the river
We returned via Ceres
LOOKS LIKE A FUN TRIP, GREAT SCENERY.
How is Betty doing with her new Turbo?
How is Betty doing with her new Turbo?
Theo.
What a great truck and you actually use as it was intended.
"Olive" will have a cousin in the states soon "Sarge."
Alex
What a great truck and you actually use as it was intended.
"Olive" will have a cousin in the states soon "Sarge."
Alex
Nice trip pics Theo.
Thanks for sharing.
Thanks for sharing.
crushers
post ho
always love visting this thread ...
- Thread starter
- #374
Thanks guys, much appreciated !
With the 33" tyres I basically lost the use of 5th gear but now it is back. I can cruise in 5th @ 2500 rpm for most of the day at 490 degC EGTs. Instead of being overtaken I can actually do some overtaking myself
I am watching your thread closely
With the 33" tyres I basically lost the use of 5th gear but now it is back. I can cruise in 5th @ 2500 rpm for most of the day at 490 degC EGTs. Instead of being overtaken I can actually do some overtaking myself
..
"Olive" will have a cousin in the states soon "Sarge."
I am watching your thread closely
Last edited:
Any news on the hard top? I can't wait to see it on there. I just went through your whole thread, and it makes me wish I had gone 6H9 instead of 6L4
What a great build!
Do you have any trouble seeing the tach with the front roll cage bar where it is located? Do you reckon the quarter window (vent window) on the front door will open? I want to do a full cage like yours, but I am concerned about these two things. I am also 6'6", so not sure how I will fit.
Josh
What a great build!Do you have any trouble seeing the tach with the front roll cage bar where it is located? Do you reckon the quarter window (vent window) on the front door will open? I want to do a full cage like yours, but I am concerned about these two things. I am also 6'6", so not sure how I will fit.
Josh
Last edited:
- Thread starter
- #376
That hard top is the one thing that I just cannot seem to get to - too many interruptions 
I have also used up all my Rust Bullet so I need to get some more before I can start.
The cage is no problem wrt the revvie at all. As for the quarter window I have to admit that it completely slipped my mind but I doubt that it will be a problem. If it is it will only be a small limitation on how far you can open it.
I have also used up all my Rust Bullet so I need to get some more before I can start.The cage is no problem wrt the revvie at all. As for the quarter window I have to admit that it completely slipped my mind but I doubt that it will be a problem. If it is it will only be a small limitation on how far you can open it.
crushers
post ho
everytime i see this thread...
well
i get all misty-eyed, what a beautiful build.
well
i get all misty-eyed, what a beautiful build.
Wow that is a very nice build im hoping my build comes along like that congratulations
I love that colour. Nice work on the build.
Falco80
Burning dinosaur bones...
Wow, fantastic build Theo! I can't believe i never really looked through this thread earlier. I love you whole approach to the build, and the finished product looks like it is well-suited to your type of travel over there. Grateful for all your pictures too - they will be handy when i start a frame-off on mine. Very sweet 40.
