Vendor Inner axle seal install tool (1 Viewer)

[sggoat]

Update!!!

I now offer two different seal installer tools. We just finished the first run for the 80-series axles. This tool also works for FF rear spindle seals!

These haven't been available in a couple if years but now they are. Specialty tool that makes installing the front inner axle seals much easier. Simply slip a seal ( stock or Marlin Crawler HD version ) onto the tool and then use a hammer to drive the seal in. The seal installer is designed specifically for the 40/45/55/60/62 and Minitruck inner axle seals. It also prevents the seal from being driven too far into the housing.
$29 plus shipping

Georg @ Valley Hybrids

Stockton CA

I have the leak. Got the knuckle kit from JT Outfitters--now I think I need the install tool. would like to order one for my '77. Let me know ship to 33920(Alva, Fl.) and I'll send check(Garrett Esterer-correct?)
Gary

 

[orangefj45]

Hey gary!
Thanks for the reply. I'll be happy to send you the tool. Did you order the Marlin HD inner axle seals? They work much better than the stockers. I have them on hand as well as everything else for the knuckle and axle rebuilds.
Send me a pm and I'll get a tool shipped out to you.
Thanks again!
Georg @ Valley Hybrids

 

[orangefj45]

Just sent out a couple more. Thanks for the orders guys!!!

Georg @ Valley Hybrids

 

[DTSkyCop]

Hi Gerog, I meant to order on of your tools a while back and got side tracked, you still have these for a 40..?? I was also interested in the 55mm socket. How much is that? One last thing, I was reading the thread and saw you suggested a Marlin HD inner seal to someone here saying the were better seals. Is that true for the 40..? Not sure what model you were saying that on... How much are they if so..?

Thanks and let me know,

Darius

 

[orangefj45]

Hey Darius.
Thanks for the reply. Yes, I have the seal installers in stock as well as the 54mm ub socket $24 and the Marlin HD inner seals which run $18 for the pair. I install them in just about every cruiser and mini truck axle.
Shipoing for the order would come to $13 and everything is in stock.
Georg @ Valley Hybrids

 

[TRAIL TAILOR]

Georg, When you get back to the shop I'll take an install tool.

Jason

 

[Michael B]

I bought one of these tools awhile back and man what a difference it makes! Best recent tool purchase. Thanks Georg!

 

[Curtice]

Pm sent

 

[Tanker120]

Sending paypal, thanks
ED

 

[DieselDriver]

Will this work on the 80 series?

I thought I read that in the first post?

If so how much for a set of marlin seals and tool to 01960

 

[Solid Taco]

Ditto on tool for 80 series

 

[DTSkyCop]

Gerog, can you let me know my total, I will take the seal installer, socket and Marlin axle seals... Are there rear inner axle seals a well.? I am going to be working on my rear axle soon installing disc brakes... Going to be in there when I remove the axles to remove the shields there. If there are some, include those in the pricing and I will pay that.

Thank you in advance and I will pay by PP when you let me know my total...

 

[orangefj45]

Will this work on the 80 series?

I thought I read that in the first post?

If so how much for a set of marlin seals and tool to 01960

Yes, I have the seal installers for the 80 as well. Will send messages to you guys.

Georg @ Valley Hybrids

 

[CruiserHappy]

Looking for a 60 tool.

Thanks!

 

[DPV7070]

Georg. I'll take one of these for the 40 if ya still got 'em.

 

[orangefj45]

Hey guys.
Thanks for the replies, messages and pending orders. I'm out of town today but will respond to each of you individually tomorrow.
Georg @ Valley Hybridsh

 

[mig79]

Interested in one of the tools for a 62 as well as a bunch of other goodies for a rebuild. PM on the way.

 

[landcruisnman]

Georg,
I need one for the 60 series and one for 80 series....$70 shipped?
Let me know..
Thx
Pat

 

[orangefj45]

I'll message you guys. Thanks for the interest!

Georg @ Valley Hybrids

 

[john schneitman]

I need a hub socket, Seals and Installer. Preferably to AK 99577. Thanks, John