Tanker120
Latest activity Postings Media Albums About Badges Post areas
-
-
Tanker120 replied to the thread 17650-60020 VSV decal.Yes thank you -
Tanker120 replied to the thread 17650-60020 VSV decal.That is exactly what I was looking for! THANK YOU! I had 2 of the 6 guessed correctly....and 5 of the colors right...
-
Tanker120 replied to the thread 17650-60020 VSV decal.Does anyone have a 1974 emissions manual, with the schematic of the vsv, I found one for 73, but need one with California specs 74 with egr. it should have the color code in it? I have the 75 manual as well, and it not the same.
-
Dose anyone have a good pic of the decal with the colored arrows for 74 vsv, I want to try to get some decals made, seems non are available...thanks in advance.
-
-
Tanker120 replied to the thread Wanted Air (Smog) pump pulley 75-76 FJ40.I did do a search, must of not used the proper terminology, if you still have a bolt on pulley style for 75-76 I will take it, I can give you a call in the AM, as I am sure this is the way you still do your business, thanks ED
-
Tanker120 posted the thread Wanted Air (Smog) pump pulley 75-76 FJ40 in Classifieds - Engine/Transmission/Transfer Case.Looking for a smog pump pulley, or complete pulley and pump, does not need to work, but can be rebuilt. Thanks
-
Tanker120 replied to the thread FJ40 Heaters; some call it restoration, some refurbish... I will let you decide.That will make it easier
-
Tanker120 replied to the thread FJ40 Heaters; some call it restoration, some refurbish... I will let you decide.Actually the pipes to the rear heater are smaller than the coil on the front heater, so the front pipe only may need a different size, If I have any left I can send it to you and you wont have to worry about getting the wrong ones...
-
Tanker120 replied to the thread FJ40 Heaters; some call it restoration, some refurbish... I will let you decide.It looks great, I have ordered two of them and $ is not bad. I get all my foam from them for seals and vents among other bulk items. Thanks for the pic and method-I will try the baby powder.
-
Tanker120 replied to the thread FJ40 Heaters; some call it restoration, some refurbish... I will let you decide.If you want to look at it, here is the link, it is the 3/4" OD 1/2" ID, again I have not ordered this size, but believe it will work, the fun is putting it on, I have read here on mud a method I believe with baby powder?, but normally soapy water...
-
Tanker120 replied to the thread FJ40 Heaters; some call it restoration, some refurbish... I will let you decide.Yes, I believe I have, I just need to order the right size, I will let you know when it comes in, it is from McMaster-carr-I have ordered some, but was wrong size. This is only the foam, not the tubes themselves.
-
Tanker120 replied to the thread FJ40 Heaters; some call it restoration, some refurbish... I will let you decide.Disassembly is the fun part, I have always liked taking things apart, trick is putting it back together, I wound up using tubs to help keep them organized and again pics and leaving as much stuff together until I was ready to work on them...
-
-
Tanker120 replied to the thread FJ40 Heaters; some call it restoration, some refurbish... I will let you decide.Also don't forget to take lots of pics of the markings, some are hard to see but location is also good and with a little research you can at least know what info could have been on the stamp. I will be adding the info I found in the upcoming post...
-
-
Tanker120 replied to the thread FJ40 Heaters; some call it restoration, some refurbish... I will let you decide.Here are some more pics of before, as you can guess it is the first step when working a any repair or restoration...lots of pics...I am only showing some of the pic that best shows what I started with. Of course there has been a few times I will...
-
-
Tanker120 posted the thread FJ40 Heaters; some call it restoration, some refurbish... I will let you decide in 40- / 55-Series Tech.There is a lot of info about Heaters on here on MUD, but I hope to add to some to that and try to be complete in the process. I welcome and ask for any corrections, better ideas and other experts that know better…I am no means an expert, but I...
-
-
We ran some black chromate the other day and it turned out really well. I probably did these a little too long....they were very black. I was thinking they were going to be more of a black chrome.....next test I do I will do them for 10 seconds...
-
Regreased, painted, and brand new electrical connector and brand new contacts cover. No nuts or arms. Works good. PM me your email if you want a video of it working. 250 plus shipping
-
Tanker120 replied to the thread Wanted fj40 seat bottom springs driver and passenger side.YES! are do you know which years those are for and are they for sale?
-
Tanker120 replied to the thread Wanted fj40 seat bottom springs driver and passenger side.I also need the frame, thanks for looking
-
Tanker120 replied to the thread Carb Cooling Fan, Which vehicle and year is this for?.Is it possible to fit both FJ40 and FJ55?, did toyota have two types of fans?? Does any one have one mounted now that take a pic?
-
Tanker120 replied to the thread Carb Cooling Fan, Which vehicle and year is this for?.l looked at pic's online and fj60 is a little different, but I did find this pic on cruiser corp, says it is for a FJ55, looks like the right one, but can't read the decal...
-
-
Tanker120 replied to the thread Carb Cooling Fan, Which vehicle and year is this for?.I do know that decal is wrong, thanks for the number
-
Tanker120 replied to the thread Carb Cooling Fan, Which vehicle and year is this for?.Thank you, crossed off my list....
-
Tanker120 posted the thread Carb Cooling Fan, Which vehicle and year is this for? in 40- / 55-Series Tech.I have had this put away for years, now trying to see which vehicle it is for, I thought it was for the FJ40, but the mounting holes do not look like the ones i see in pictures. Any help would be great....also missing the fan, the decal may not...
-
-
The number of bad reviews for @Cruiser Corps is sad and probably only challenged by CruiserParts.net. Their catalog is extensive but this is truly unfortunate.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
