- Thread starter
- #41
And which one? I just searched toyotaparts.com and like 4 came upThat hose looks like the pesky heater hose (PHH) and yes, that needs attention ASAP. Not sure on the cable, I have an HDJ81 from Japan so not much comparison.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
And which one? I just searched toyotaparts.com and like 4 came upThat hose looks like the pesky heater hose (PHH) and yes, that needs attention ASAP. Not sure on the cable, I have an HDJ81 from Japan so not much comparison.
****...it's hard to see. I can't from top. I happened to be wedged between tire and wheel well looking at stuff and saw itIf it is the PHH, if it cracks and splits…..I believe you will lose a lot of engine coolant quickly, possibly like artery bleed quickly.
Like near the back right side of engine if ur looking at the cruiser head on. I guess underneath the egr stuff. That area but far enough down I can't see from aboveIs this it? Sorry, I have a 1-HDT and I believe the PHH is located elsewhere on the engine.
View attachment 3470900
Wait so I can't just replace the one little section?Here you go, explanation and coolant hose routing……
the hose you pointed out in one of your pictures is brown……it could fail at anytime.![]()
Coolant leak by rear heater hoses/firewall - 97 LX450 - 1FZ-FE
Hello, I am experiencing a coolant leak and it looks like there is a hose that has exploded and is no longer connected. Please see pics below. Is this hose that got disintegrated part of the rear heat system? Can someone please help me identify or confirm what parts are needed to fix this or...forum.ih8mud.com
Which is better route? Delete or just fix that piece? Less headaches, quicker fix?Yes, you can replace just the piece of hose that is the PHH, new clamps would be a good idea.
![]()
IMHO….I wouldn’t run anything until that brown piece of hose is swapped out for a new piece of hose. It needs attention asap.Should I run the heater tonight after work to get it home?
Ya I learned my lesson took a wk to ship out my vent hose. Now that I've identified the hose the fsm will help. I was wayyyy off thinking it was a bypass hose looking at the fsmAlso I wouldn’t order from wits end, unless you want to wait an unknown amount of time for your parts
Homie, what did I say? I looked through it. Couldn't find it. I have it downloaded. What's frustrating is having to defend myself w u. I couldn't identify the hose, chastise me. Now that I have, I can figure it out. Like damn.Go look up the diagram in the cheat sheets in the 93-94 FSM available to download in the link in my signature. It’s hosted here. I literally took hours to put together photos that label all of the hoses in the heating system with their part numbers. I’m not going to help you anymore unless you listen to me and get that damn fsm, it would’ve answered your questions about how the system flows hours ago. I spent days putting it all together and years refining and updating it to help countless members on this forum, the fact that you keep avoiding using it and asking these questions is honestly infuriating.