- Thread starter
- #101
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
You’re crazy.
it ain't braggin' if you can back it upthat's the whole idea mr. white stripe ...
i think ?
i will have a 100% ALL NEW OEM hardware full floating AXLE assy. when finished ............maybe
if i do i get the bragging rights ,
but one who brags prematurely is a FOOL in a FOOLS world .......
Nice work Matt!!! I noticed that also but didn't know if maybe it was different on the 60 FF vs the 80 FF.
Picture of my 80 FF before replacing studs and cleaning it all up to get dirty again. Took this as I would have installed short end otherwise.View attachment 3274262
Rear diff stud part numbers:
90116-10167: Q=1: LENGTH: 63.5MM
90116-10124: Q=2: LENGTH: 91.4MM
90116-10074: Q=4: LENGTH: 40.5MM
90116-A0025: Q=3: LENGTH: 53.5MM
Ten total studs.
Two longest ones go to where the elocker assy attached to housing.
The sticker looks like an hourglass! That is ironic.....way too much time on this one.