Most of the pics have dropped off, can you guys repost some, close-ups of installed wings?
Thanks
Thanks
HEFTY Fabworks Rear Bumper Wings!
- Thread starter ardentyota
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
How would these work with the factory tire carrier?
ardentyota
Flexy
- Thread starter
- #123
Not sure why they aren't working. They're all still in the same spot. I'll try to get some additional pics up tonight. I'll see if Hefty has any additional pics from other customers too.
No interference.
My wings arrived at my shop in Orlando last month, but I've been home in NYC and didn't see them until last week 
They're definitely HEFTY
I had them build the tire carrier on the driver's side and a bare swing out on the passenger side because I plan on welding up my own beer cooler carrier
Chris is sending me a free gusset support with "HF" logo for the passenger side, so I'll be putting off the build until it arrives....
They're definitely HEFTY
I had them build the tire carrier on the driver's side and a bare swing out on the passenger side because I plan on welding up my own beer cooler carrier
Chris is sending me a free gusset support with "HF" logo for the passenger side, so I'll be putting off the build until it arrives....
OK, I just couldn't wait any longer and just had to install them 
Started off with a good coat of sealer, then Raptor liner inside and out
Started off with a good coat of sealer, then Raptor liner inside and out
I absolutely love these wings
Excellent design and extremely well built
The install went smoothly with the exception of a bolt I snapped in one of the captive nuts years ago
Drilling didn't pan out, so I ended up removing the nut with an air chisel and used a standard nut and washer
There were only a couple minor issues....
1) The wings aren't built around the OEM tow loops, so I had to relocate them further forward on the frame....
2) Unlike Ardent's tire carrier, mine has a fixed mounting plate that is not adjustable
I have no problem with this as the fit is perfect for my 33" tire, but those running larger meat might want to go with the adjustable style mounting plate or let Chris know what size you're running when placing your order
Excellent design and extremely well built
The install went smoothly with the exception of a bolt I snapped in one of the captive nuts years ago
Drilling didn't pan out, so I ended up removing the nut with an air chisel and used a standard nut and washer
There were only a couple minor issues....
1) The wings aren't built around the OEM tow loops, so I had to relocate them further forward on the frame....
2) Unlike Ardent's tire carrier, mine has a fixed mounting plate that is not adjustable
I have no problem with this as the fit is perfect for my 33" tire, but those running larger meat might want to go with the adjustable style mounting plate or let Chris know what size you're running when placing your order
Nice.
NIce write up and pics.. thanks for sharing..Do you think that the wing gussets are sufficient to hold up under the weight of the cruiser?
ardentyota
Flexy
- Thread starter
- #132
2) Unlike Ardent's tire carrier, mine has a fixed mounting plate that is not adjustable
I have no problem with this as the fit is perfect for my 33" tire, but those running larger meat might want to go with the adjustable style mounting plate or let Chris know what size you're running when placing your order
Regarding the adjustability- Chris started asking the Backspacing and tire size to build it specific for the tire. The adjustable carrier is still available, but it is a source of minor rattle.
They look really good with the liner!
Hey Nate,
Could you remind Chris about the gusset plate?
I tried emailing him twice today, but they both got bounced back for some reason
Could you remind Chris about the gusset plate?
I tried emailing him twice today, but they both got bounced back for some reason
ardentyota
Flexy
- Thread starter
- #134
Hey Nate,
Could you remind Chris about the gusset plate?
I tried emailing him twice today, but they both got bounced back for some reason
He sent it out yesterday. He's been having some issues with his email box and he's working on that as well.
I would buy a pair of these instead of a bumper except for the fact that I need to tow and a full bumper like a 4x4 labs will provide with me a receiver for that. If I have to flip and cut the stock receiver then I might as well come up with my own wings also.
I guess I missed the part about flipping and cutting the stock reciever. Where did you read that?
I am interested in these wings as well but need my stock reciever for towing as well.
I'm not sure what you mean by flipping and cutting the stock receiver, but these wings will work with the factory hitch assembly
Here is a bit of info
https://forum.ih8mud.com/80-series-tech/150666-trailer-hitch-idea.html
My point is that mere wings don't provide me a high clearance receiver for towing.
https://forum.ih8mud.com/80-series-tech/150666-trailer-hitch-idea.html
My point is that mere wings don't provide me a high clearance receiver for towing.
Ah, ok
Your last post made it seem as though you had to modify the stock receiver when installing the wings
