Builds Going to the Dark side 60 Build

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

A person could sell those older engines and use the money to buy a new engine from a junk yard, with all the right sensors and smog equipment. There is a market for your older stuff.

I do agree an older 350 is still better than a 2F. My 80 with the 3fe was on it's way to an LS swap then I sold it.
 
Putting in an engine older than the vehicle is crazy in California. And so is saying "I'll figure something out". I don't know the California rules, but I think not only won't you be able to pass smog, you won't be able to sell it either. JMHO.
Ha Ha No plans on selling it, its not staying in Calif, This isn't my first build. I appreciate the input and honestly I cant wait til its finished. Were stoked and why not its our rig. Whatever happened to " Right on build what you want "
 
Haters gonna Hate LMAO ! Why all the negativity Its a Cruiser Build Ha Ha Ha
Sorry just had to post some good laughs. Just some of the ideas in Kalifornia suck.
Good luck with the build.
 
All a waste of time rebuild the 2F pops or just put one of the spares you have somewhere in a stash In a back room somewhere.....





Haha nah I’m kidding :rofl:. Toss that thing in and drive it like you stole it. Put an LS in something when you retire!
 
Really productive day. And while we were at it why not think about mocking up a Turbo LOL Why not its my build HAHAHAHA @whitey45 , @Mace

IMG_20181228_131348821.webp


IMG_20181228_151345135.webp


IMG_20181228_155127501.webp


IMG_20181228_160542190.webp


IMG_20181228_160550439.webp
 
That looks like a supercharger? It would actually be pretty good. Do it!
 
That looks like a supercharger? It would actually be pretty good. Do it!
My buddy put that on there LOL were still going Ol school Just messing around, Sorry to get your hopes up.
 
Finished up the T case today. Thanks Valley Hybrids @orangefj45 for getting me the rebuild kit. Next week I should have the Advance Adapter motor mount kit, Trans mount kit and some other bits. Yes its a 4 speed T case LOL

IMG_20181230_151032023.webp


IMG_20181230_151047481.webp
 
Awesome :)
 
Cleaned up a few things under the 60 today. While I was doing that my buddy Olen was mocking up an AC bracket so we can run the Toyota compressor. Still waiting on a few things that we ordered. Should have the trans and t case bolted together this weekend. Yesterday I spent some time at the local auto junk yard found a water pump pully, trans cooler, and some carb brackets.

IMG_20190103_124632522.webp


IMG_20190103_141627899.webp


IMG_20190103_141635845.webp


IMG_20190103_150837832.webp
 
Today was another great day Finished up getting all the small parts rebuilt or cleaned. Motor, trans and t case are bolted up. Took us about and hour to get everything centered and lined up. Tons of clearance and everything is looking good

IMG_20190115_121431947.webp


IMG_20190115_123249347.webp


IMG_20190115_130615649.webp
 
Installed and finished tacking up the front motor mounts. Tomorrow we can start on the rear trans crossmember.

IMG_20190115_143203381.webp


IMG_20190115_150359138.webp


IMG_20190115_150416007.webp
 
Is this going to be a crawler? Looks real old skool…. cool.
Daily driver/some wheeling Down the road we might make some extreme changes. SOA, gears and such
 
We finished up the front motor mounts and built the rear trans and t case support. Im really stoked about how well this is coming together. I got the Lokar shifter and rams horn exhaust ordered last night. This weekend I will get all the fluids and dizzy stuff, plugs and the rest of the misc stuff together. By next week we should be ready for driveshafts

40427.jpeg.webp


IMG_20190116_164525847.webp


IMG_20190116_164538807.webp


IMG_20190116_164552215.webp


IMG_20190116_161055910.webp
 
Heading out this morning to finish up the t case linkage, By this weekend we should have everything we ordered to complete the motor.

IMG_20190117_115328209~2.webp
 

Users who are viewing this thread

Back
Top Bottom