For the 60? Paging Marc's dad....
For Sale @ High Desert Cruisers
- Thread starter Ruadhrigh
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
For the 60? Paging Marc's dad....
Hi frogger. If you are directing that to me then I'm not really looking for anything in particular. I have a 4-port KVM that went TU about a year ago. Ali's KVM is a solution but his appears to be missing the USB adapters and those are going for stupid money on eBay.
If your IBM server is more than about 2 years old then it wouldn't have much, if any, value.
-Mike-
Might have to dig deep through the pile for that one. The one from that parts truck is installed on the 60 I just sold. If there is one, it's the one that was on my truck when i bought it, smashed up.
If it's smashed or you have to dig for it don't worry about it- I found one up in Jersey for $15 (plus shippng). Figured I'd look local first.
Thanks
I'll ask my father to look, but don't hold your breath.
1976 fj40 project rig. Nearly rust-free Tx/NM rig with v8 motor mounts, 305/4sp included but not installed. Original green paint with lots of sun--paint is gone on hood and other places leaving surface rust. The only rust in the rig is some in the rear floor where the mat trapped moisture--rear sill has 1 quarter-size spot, doors, rockers, everything else is good. It has been sitting for some time, so probably needs work on hydraulics, etc, but would make a really clean rebuild for someone looking for a project. The seller is asking $1500 and it's just south of Santa Fe on 14. I don't have any pics, but I did look at it and can give more info. send me a message and I'll find his phone number if interested.
'72 FJ40 in Santa Fe
Anyone know anything about this 40?
toyota landcruiser 1972
No affiliation, just curious...
Anyone know anything about this 40?
toyota landcruiser 1972
No affiliation, just curious...
DanS HJ-45
SILVER Star
I don't know anything about it, but that sounds about right for the price. I'd certainly go look at it if I was at all in the mood for a 40.
Dan
If you look at it I would really study the V8 conversion. I've seen some scary hack jobs. I've also seen some super sweet and clean installs.
If I were to buy another Cruiser my wife would probably make me live in it, so I better not even call the guy...
I would prefer an original-ish engine anyway.
Hope somebody grabs it, though!
I would prefer an original-ish engine anyway.
Hope somebody grabs it, though!
You were not there when my fuse block caught on fire in my '71 driving home one night. And then taking it all aprart to see what a PO did, that was fun to see!
What an idiot!
Door Access Panel
I need one door access panel for an early door. Number 28 in this Spector drawing.
I need one door access panel for an early door. Number 28 in this Spector drawing.
I need one door access panel for an early door. Number 28 in this Spector drawing.
I think I have an extra one you can have. I will check my parts later tonight. The hardware may be iffy.
I need one door access panel for an early door. Number 28 in this Spector drawing.
I have one you can have if Rudy can't find his.
Vince
Thanks. Bolts I have. Also, this is the early 4-bolt, not the later 6-bolt.
Looks like one of the smaller Military trailers (looks like a 1/4 ton m416) on Auction, ending tomorrow, near hatch:
GSA Auctions®, General Services Administration, Government Site for Auctions
Look under NM. CARGO UTILITY TRAILER item: 71QSCI09320011 current bid $260, and bidding ends tomorrow 6/2 at 3:42PM our time.
If I could make it down to the hatch area to pick it up by 6/16 (m-f only) I would be bidding.
GSA Auctions®, General Services Administration, Government Site for Auctions
Look under NM. CARGO UTILITY TRAILER item: 71QSCI09320011 current bid $260, and bidding ends tomorrow 6/2 at 3:42PM our time.
If I could make it down to the hatch area to pick it up by 6/16 (m-f only) I would be bidding.
Sorry, you may have to take Vince up on his (unless the one on the door of the sold '71 "accidently" was missing, I know, that wouldn't be nice). The cover that has a similar x is to something else (after uncovering it has about the dimensions of a valve cover). The other cover I thought may be it, goes I don't know where. Need any other covers, panels? There are quite a few sitting out there.
I have a 25% off Pit Bull tires certificate that I won in Moab. Could anybody use it? 25% off 4 pit bull tires redeem directly through pit bull tires valid until July 31, 2009 value not apllicable to shipping, handling, or taxes.
I'm headed for the Rubicon tomorrow so talk to Dan.
Also have a pinion seal 79/89 from marlin crawler.
I'm headed for the Rubicon tomorrow so talk to Dan.
Also have a pinion seal 79/89 from marlin crawler.
My BIL will be coming up from Cruces either this weekend or next for drill weekend: I could ask him to snag it for ya. Lemme know.
Still only $260 - Maybe I should bid on it...
edit: I did. Slimbuddha get's dibbies if by some crazy cruiserma I win. Let's not be bidding against each other, K?
Last edited:
Anyone interested in a Unimog?? Saw this one today at Coors and Eagle Ranch. Looks in very good shape, no rust at all. New tires, paint looks great and so on. They were asking 7500 for it.
Daisy
Daisy
