SAS'd 93 pickup, dual case, 8" lift (overall) 35's. Owner said he is moving to Europe in a week, so he is flexible but wants $4500.
93' Toyota Pick-up
V6.
93' Toyota Pick-up
V6.
For Sale @ High Desert Cruisers
- Thread starter Ruadhrigh
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Piggy side view mirrors
Anyone need a set here? Still clearing out the garage. They are off a '76 FJ55. I can drop them off anywhere near ABQ or RR, If not, they go on the Mud list.
Anyone need a set here? Still clearing out the garage. They are off a '76 FJ55. I can drop them off anywhere near ABQ or RR, If not, they go on the Mud list.
Anti-inversion shackles & extra shock bushings
HDC mudders get first dibbies; I'll throw em up on Mudbay next week. Mudbay shipping down the mountain...
NIB anti-inversion shackles, just 2. $50 OBO
Shock bushings, free (but you own Shawn a
when you snag them from him)
HDC mudders get first dibbies; I'll throw em up on Mudbay next week. Mudbay shipping down the mountain...
NIB anti-inversion shackles, just 2. $50 OBO
Shock bushings, free (but you own Shawn a
when you snag them from him)
Mountainsmith XS camera/phone/FRS case
Too bulky for my camera, too big for my phone & mp3 player, but somebody's gotta have a use for it.... $10 includes CONUS shipping or mudbay shipping down the mountain to the big I.... or OBO.
Too bulky for my camera, too big for my phone & mp3 player, but somebody's gotta have a use for it.... $10 includes CONUS shipping or mudbay shipping down the mountain to the big I.... or OBO.
Pics and address are that lemon lot down on Menaul west of San Mateo close to 4-Wheel Parts.
-Mike-
-Mike-
Figured I'd give you guys first dibs on the extra parts I have accumulating in the garage after all my mods. All this came off my stock 96 80 with 161K miles. I know most of you probably tossed the same stuff, but somebody mind find something useful from this list. Not looking to get rich off any of this, just be glad to get it out of the garage.
What I have left:
Front and Rear Springs
Front and Rear Panhard Rods
Rear Upper Control Arms
Steering Stabilizer
Front Bumper
Rear Bumper End Caps and Middle Plate
Running Boards and End Caps
Mud Flaps
Roof Rack and Associated Parts
Bug Deflector for Front Hood
Bug/Wind Deflector for Sunroof
Class 3 Receiver
Spare Tire Mount/Mechanism
Later,
--Keith
What I have left:
Front and Rear Springs
Front and Rear Panhard Rods
Rear Upper Control Arms
Steering Stabilizer
Front Bumper
Rear Bumper End Caps and Middle Plate
Running Boards and End Caps
Mud Flaps
Roof Rack and Associated Parts
Bug Deflector for Front Hood
Bug/Wind Deflector for Sunroof
Class 3 Receiver
Spare Tire Mount/Mechanism
Later,
--Keith
Keith,
The 4Runner guys will buy those springs. They get a 4" lift when using them. Seems like they use our front springs for the rear or vice versa.
PM AlbuquerqueJim here on 'Mud. Jim reads our club forum sometimes and he can give you tips on how to sell them and what they are worth.
-Mike-
The 4Runner guys will buy those springs. They get a 4" lift when using them. Seems like they use our front springs for the rear or vice versa.
PM AlbuquerqueJim here on 'Mud. Jim reads our club forum sometimes and he can give you tips on how to sell them and what they are worth.
-Mike-
Yep - the 80 fronts work well on the 3rd Gen rear. Sonoran Steel Custom Metal Fabrication L.L.C. actually uses them in their lift.
Stock bumpers and running boards go pretty well on Ebay.
Stock bumpers and running boards go pretty well on Ebay.
Hello all. My name is Eugene Smith, I'm a relative newbie on IH8MUD, thought I'd check locally for some help. I have an 87FJ60 with a shot rear end. I'm in need of a new rear axle assembly, possibly just the 3rd member, if it is mechanically sound. Any luck you guys know where I can acquire one. I'm stuck in the shop so any help at this point would be greatly appreciated. I'm down here in Las Cruces. Thanks again.
Eugene Smith (575) 571-8581
Eugene Smith (575) 571-8581
60 rear axle.
I've got a complete rear axle from a '86 that I parted out awhile back. If your willing to come pick it up (in Los Lunas) I'd be willing to sell it. Say $150?
Axle is in good shape, although it could use a good cleaning and fresh seals and gaskets while it is not connected to a truck.
Send a PM if you are interested.
I've got a complete rear axle from a '86 that I parted out awhile back. If your willing to come pick it up (in Los Lunas) I'd be willing to sell it. Say $150?
Axle is in good shape, although it could use a good cleaning and fresh seals and gaskets while it is not connected to a truck.
Send a PM if you are interested.
SROR 1st gen FJ60 non-winch bumper, $350 to HDC
https://forum.ih8mud.com/sale-parts/271816-back-market-1st-gen-sror-fj60-non-winch-bumper-abq.html
Thinkn I'm going to keep the lifted rig more stock: this bumper sticks out a wee bit up front. AND, I need sliders now that I got the BFG's swapped over (it got TALL).
https://forum.ih8mud.com/sale-parts/271816-back-market-1st-gen-sror-fj60-non-winch-bumper-abq.html
Thinkn I'm going to keep the lifted rig more stock: this bumper sticks out a wee bit up front. AND, I need sliders now that I got the BFG's swapped over (it got TALL).
80 PS Pump, Front Drive Shaft, 4.11 R & P
Extra parts from the latest mods:
PS Pump (Sold to Mike)
Front Drive Shaft $50
4.11 R & P $30 for both sets
The Michelin LTX M/S (275/70/16) tires are also up; $100 for all 4. 3 of them are almost new, 1 has about 1/2 the tread left.
The power steering pump was cavitating, so don't know if it is worthy of a rebuild or not. The drive shaft needs new U-Joints and the R & Ps didn't show any abnormal wear. Also have the front rotors if anyone wants them for anything.
--Keith
Extra parts from the latest mods:
PS Pump (Sold to Mike)
Front Drive Shaft $50
4.11 R & P $30 for both sets
The Michelin LTX M/S (275/70/16) tires are also up; $100 for all 4. 3 of them are almost new, 1 has about 1/2 the tread left.
The power steering pump was cavitating, so don't know if it is worthy of a rebuild or not. The drive shaft needs new U-Joints and the R & Ps didn't show any abnormal wear. Also have the front rotors if anyone wants them for anything.
--Keith
Last edited:
Do we have any club members that are SERIOUSLY looking for a good deal on an 80? If you are then send me a PM. I already sent a PM to Sean so he has first dibs if he is interested.
-Mike-
-Mike-
Tell me a little more, Ive got a friend that maybe interested...
Daisy
Daisy
i'm not in the market for one yet, so go ahead and pass out the info. thanks for thinking of me!
a buddy just bought a 93 FZJ80 from Cali with 6"slee lift, both bumpers and tire rack, sliders, factory diff lock, 35's, etc. for $5K. it looks sweet.
So we can talk about it now?? He told me he wanted to surprize you with it... I already called shotgun, er, rear passenger, er, 4th rider
Century Primus two burner "match-less" stove. I just upgraded. $10.
Known issue. It works fine, but the piezo ignition doesn't work reliably. I tried using BBQ grill bits to fix it, but it only sort of helped.
Known issue. It works fine, but the piezo ignition doesn't work reliably. I tried using BBQ grill bits to fix it, but it only sort of helped.
Green FJ40 for sale on Corrales Rd. on the left hand side as you are heading north...don't know much about it as I just saw it going to the Post Office.
I'll try to check it out tomorrow and get some more info. on it.
I'll try to check it out tomorrow and get some more info. on it.