for sale: 89 FJ62 with blown engine (15 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Man no big deal. All should know that must have been a mistake
 
Freakin nice ride! DAMN the tree hugging bastards at government, DAM I say! Stop tryin to save me from myself, assholes!!!!!!
 
estimated or typical price?
...including price for FZJ + any taxes/fees + shipping...
 
New Price

I'm lowering the price to $3000

Reason:
It is going to need a brake job, not sure how extensive it will have to be. Pedal goes to the floor, the cruiser does stop just not the way it should. It has plenty of fluid and I've never heard the squelers. Like I said I not sure of the exact problem and I don't have the time to check into it.
 
did i just miss the translate to english link?? Or do all of you know French that well

lunyou
 
Posting pictures would be a good idea, I might be interested and that seems like a good price if it's as clean as it sounds. Not sure that a bad HAC valve would screw up the timing to the point that it wouldn't start. (?) Is all the emissions equipment in place?
 
I'm digging the truck out Saturday evening sometime--it's buried under a bit of snow up here right now.... I'll get some pics posted in the next few days, by early next week. Truck is definitely clean, the pics will show that. I've had issues with the timing for a bit now. Since I just put in a rebuilt dizzy, I figured it might be the HAC, since it was fine until I started up over Berthoud pass on my way here. I do plan on getting it dialed in here in the near future so it will at least start. All of my work was performed at Comprehensive Car Care on Evans in Denver (near DU)--great Landcruiser specialty shop. All emissions equipment is indeed in place, Mark at Comprehensive had a great time fixing all the stuff the PO had done to bypass it all.
 
The price is a bit over 35K US, based on the current exchange rate. I'd like to know why Toyota figures the FJ cruiser is a better sell to the US market (?)
 
89GASHOG said:
The price is a bit over 35K US, based on the current exchange rate. I'd like to know why Toyota figures the FJ cruiser is a better sell to the US market (?)
:idea: 'Cuz it's $12k cheaper?
 
got cruiser?

I've got an '83 for sale in Iowa. Runs great all stock w/ 180k.
rust in the fenders, $1800. Graduated college + no job = I will deliver.
Nav
 
land cruiser

If you still have it for sale call me cell 612-290-3193 home 320-629 3187 thanks
 
85 FJ- 60 For sale in Buffalo NY

$2300 or BO​

Daily driver as you can see, there are plates on it. I use primarily to drive back and forth to the ski-slopes.

New Parts:
  • 4 shocks​
  • 6 new spark plugs​
  • Cap and Rotor​
  • Shackles​
  • Polyurethane bushings all the way around​
  • Powersteering pump​
  • Full exhaust (exhaust doughnut to tailpipe, original cat)​
  • 8000 lb. winch (never used)​
  • Wiring harness rear​
  • Bumpers​
  • Roof rack
  • Australian fender flares
  • Fuel pump
  • All running bulbs replaced
  • Spare tire chain (rear underneath)
  • Sending unit
  • Radiator and Hoses
  • Windshield w/gasket
  • Drivers window regulator
The truck (Originally from Florida) is 21 years old and has 171,xxx miles on it, that is less than 9000 miles a year. I bought this truck in fall of 2004 from second owner in WNY. It is mostly original, with exception of fender flares and rocker panel w/dog leg. Will cruise @ speeds up to 70-75 mph in 4 th gear. Has slight leak from rear main seal that marks its spot every morning with two half dollar size spots (I use Mobil 1 synthetic oil). All 2 wheel and 4 wheel drive train components work correctly w/o any problems. Shifts flawlessly. Has WARN lock-outs. AM/FM Cassette is IPOD ready, only two front speakers. Gets roughly 15 mpg in the city. 3 Goodyear Wrangler's are about 50% treadwear, the right rear is new. A/C does not work, condensor is removed, however all hoses are there. All lights work, including back up light. Original Toyota jack, tools and bag under drivers seat.

can still be viewed here:http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4612000313&sspagename=ADME%3AB%3AAAQ%3AUS%3A1.

feel free to drop a line @ justin.majewski@adelphia.net or call me 716-951-0366. I can take picture upon request
 

Users who are viewing this thread

Back
Top Bottom