Wanted FJ60 Manual (17 Viewers)

[1FE pig]

parting a 83 bj60 .Let me know if you still need them.Rob

 

[nick]

WTT hard top

'78 hard top with side vent windows for '74 hard top (or just the side panels).
Located in So. Ca.

 

[goatgetter]

..just to clarify.. i do intend to buy them.

..not looking for a free-bee, although free, is always within the budget!!

 

[wantatlc]

if you find a good Toyota parts guy(like Cdan) then you can get a new one(in the cute bag) for under $30

who is cdan? how can I find him? did godzilla fight cdan? or was that rhodan?

 

[scott74_40]

Non USA Vacuum Advance Dist.

Need a small cap Dizzy that will fit a '74 landcruiser that is in good-great condition.

 

[Merc]

Sm420 Adapter Plate Please

I have been looking for one of these for about a year now. I would really like to find one. If anyone has a link or somewhere to get one for a little bit cheaper then extreme bends is extremely helpfull. I hate this stock 3 speed someone please help

Merc

 

[LCS]

Thanks LCS- I PM'd you.

Rezarf <><

Drew,

Your Welcome, Thank you! Sent the invoice. Please feel free to call or email if you need anything else.

Tim Simpkins
Landcruiser Specialties
www.landcruiserspecialties.com
503-693-1656

 

[weak-link]

PM mark, he goes by 65swb45. I think he has some up on ebay right now also

 

[65swb45]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7992972627

 

[65swb45]

Keep in mind the tire carrier for the dropgate models is DIFFERENT than for the hardtop models.

 

[3_puppies]

Chris, have a set of diffs out of a 78, here in Helena. do you just need the outer handle? I have one of those also. Paul

 

[pappy]

I need two disk brake spindles & hubs (the ones the rotors bolt to).
I'm going to get rid of my Warn Birfield Eliminator kit and go back to
Toyota parts.

I have the spindles, but not the hubs.

 

[Fearnofish!]

Paul!!! you are the man! Helena??? Damn you're close.
PM'd ya!

Mike,
Toronto is above cleveland right? That's about a three day drive......
thanks anyway.

 

[Fearnofish!]

Anyone have powertrax noslip they want to sell?

 

[Fearnofish!]

Powertrax No-Slip???

Looking for a locker for my 1984 FJ60. Powertrax would be my choice but I would consider a non-auto locker if someone had one.
Thanks in advance...

 

[LukeZero]

My advice would be either an Aussie Locker, if you can get one (sometimes the wait for one has been long)- or save for an ARB. I've not had good experience with the Powertrax. Just my $.02. Luke

 

[2badfjs]

got it!
thanxs all
3_puppies you got a pm

 

[Cantinero]

fj62 pw relay

If anyone has one that they want to get rid of please shoot me a pm.

thanks, D

 

[Vortec_Cruiser]

Thanks, but I'll keep trying to find the parts closer to home.

 

[Wadesters]

I have wheels if you still need them

Check the following site for stock whells if you still need them. I am located in Atlanta zip code 30215
http://www.fototime.com/inv/BB5A28DF1E1FF3C