FJ60 Condenser question (4 Viewers)

[4runner2FJ60]

I just tried emptying the oil from the old one and it is bone dry! Explains the mess it is on the bottom. Can't really measure the oil and compare with new one. Any suggestions? Thanks

 

[RE2RO]

Does anyone know where to find a replacement condenser these days? I cannot find anything listed by Denso anymore which is what others have used as I have pored through this forum. I have a 7/1986 Fj60.

 

[dbbowen]

Does anyone know where to find a replacement condenser these days? I cannot find anything listed by Denso anymore which is what others have used as I have pored through this forum. I have a 7/1986 Fj60.

new condensers are NLA anywhere world wide. Gotta go used or aftermarket now unfortunately unless you can find one in a toyota warehouse somewhere.

 

[arcadian]

Anyone know of an aftermarket that will work? Or can an ac shop custom for one?

 

[adman02]

Hi. I actually have two used ac condensers, but they are both for an FJ62 (I think there are some slight differences). One came with my vehicle and I had to wrestle it off prior to my LS swap, so it's a little worse for wear. The other I bought on ebay just for the drier-to-condenser pipe, so I have no idea if it's functional. Anyway, if you're interested in either or both, just let me know.

 

[arcadian]

Thanks but I looked at the ones for the 62 and I don’t think they will work without new custom hoses. I think I will get an aftermarket cool stream and just have custom hoses fitted.

 

[rmcc212]

I have a 1982 FJ 60 and need an AC Condenser. I am having the hardest time finding one. I also need so other misc parts to the AC. I looked at SOR and EBay Motors and Rock Auto. Any other place to find these rare AC parts?

 

[rmcc212]

4770154 Is what I used from rock auto.

Bolted up without an issue.

What year and model is the LC that you put the 4770154 AC Condender on to from Rock Auto?

 

[HemiAlex]

Thats my 1/87 60 series. That was a very long time ago.

 

[arcadian]

I searched high and low and could not find one anywhere for my 1983. I bought a universal from cold hose and am fabricating a mount and lines, hope it works.

 

[TRAIL TAILOR]

I'm taking them to a local radiator shop and having them cleaned, pressure checked and painted. So far great results.