FJ25 and Early FJ40 Soft Top Project.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

ok, had some progress on this today. I talked to Atlas which is a canvas shop in New Haven, CT. He gave me an estimate of at least $1000-$1500 a top and he will need a truck to fit it to. He is also maxed out until mid July. I also have another email into Beachwood to get an updated price from them. I sent them pics also.
 
LandCruiserSteve said:
Also, is there a big difference between FJ25 and FJ40 soft-top bows?? :confused:
Click to expand...

I thought that early soft top 40's (FJ25-CJ5 style door openings) the B-hoop is narrower than a hard top 40/25. I compared the hoop/tub measurements between CruiserKen's soft top troop carrier and my '63 soft top 40 and the rear hoop looked like it would fit, but the middle hoop was definitely different.

Dan
 
Dan

The rear bow on the 25 is the same size as the 40. The front bow is different, on the 40 it goes into the door post socket, on the 25 it comes inside the rail and is mounted on a bracket.

Steve's 25 hardtop is basically the same as a later 40 tub.
25SoftTop.webp
 
Cruiser_Nerd said:
Steve's 25 hardtop is basically the same as a later 40 tub.
Click to expand...

Correct. Matter of fact, that's exactly why a later model 40's aftermarket soft-top (Kayline) fit perfectly on my HT 25.

That being the case, I've been looking for a later 40's OEM style soft-top and bow configuration.
FJ25HTST1a.webp
 
Alright, since I'm the outcast with the A bows, I'm going to temporarily convert my truck to B bows so I can drop off my truck to get going on canvas. Anyone have the contact info on that shop in VT that was talked about in some other thread?

EDIT: New Life Resources Canvas Shop in VT sound familiar?

EDIT: DOH! They say they're booked

EDIT: THEY'RE CLOSING SHOP!!! THATS NOT GOOD!!!
 
Last edited:
foxfab said:
ok, had some progress on this today. I talked to Atlas which is a canvas shop in New Haven, CT. He gave me an estimate of at least $1000-$1500 a top and he will need a truck to fit it to. He is also maxed out until mid July. I also have another email into Beachwood to get an updated price from them. I sent them pics also.
Click to expand...
$1000 US for one top. :).. Thats a lot. If I had one set of a pillars here in Pakistan, I could do the tops and bows in around US$700 (same as the later 40s).
Ehsan
 
Mike, we'll put the two side by side to get them to match up. Do you have the location for the rear brackets, it'll make a big diffference at the top of the bow.
 
yep, upper rear brackets are welded to the stock location. Rear hoop fits in them nicely. I have the project tub to get the location of the lower brackets. They're drying right now, fresh outta the blaster. I'll drill tomorrow. I need the length of the bars that go between the front and rear hoop and the location of the mid hoop on the bars
 
Just in case someone else is following along at home, making bows. ;)

IMG_0328.jpg


IMG_0329.jpg
 
LandCruiserSteve said:
Does Eshan sell FJ40 bows separately from the canvas tops?
Click to expand...
Yes we do... I wish I had a 25 tub here on which we could reproduce the top.. Can someone post pics of the A post... These look very different from the 40 series..
Ehsan
 
You must log in or register to reply here.

Similar threads

R
FJ25 information
Replies
11
Views
712
Archie 1962 FJ25
A
whitey45
Early hood spears
Replies
1
Views
392
65swb45
65swb45
DrRock
1962 FJ40 Doors and Top- Where to Source
Replies
8
Views
1K
rainingagain
R
hdjtachtig
FJ25 universal joint
Replies
1
Views
858
hdjtachtig
hdjtachtig

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom