Builds FJ 45 Extended Cab Custom Vehicle Build Finally Begins (4 Viewers)

[BamaBleach]

Ready to shoot the lining inside the cab.

It is color matched to the Dune Beige.

Sorry if you addressed this earlier and I didn't catch it but...

What's the specs on that lining? I need to do the same thing on my Cruiser and I'm needing a Dune Beige-ish match.

Thanks,
Phil

 

[D'Animal]

I used U-Pol liner.

The color match was Beechwood Gray.

 

[Mace]

Pretty

 

[D'Animal]

I love it when UPS damages stuff and it turns into SWAG that can never be sold. LOL


Fits perfectly between the tie downs.

 

[Butt Ugly Chuck]

Perfect! A little weatherstripping on it and it'll be weather tight too.

Will the headache rack go back on after the roof?
Butt

 

[ToyotaDon]

I love it when UPS damages stuff and it turns into SWAG that can never be sold. LOL


Fits perfectly between the tie downs.

Pretty

What he said.

 

[D'Animal]

Well the texture and the new batch of paint is a shade or two off from what I already painted the inside of the rig.

Rough sanding and Repainting the Dash firewall and the doors.

 

[D'Animal]

I think I would rather rebuild a front axle than Sand and prime and eventually paint a roll cage.



LOL

 

[D'Animal]

If you want the window at the corect angle on both side of the rig and you want the doors to shut correctly, you have to start adjusting at the back cab corners and then to the Rain Gutter, etc.


LOL

What a day.

 

[D'Animal]

If you want the window at the correct angle on both side of the rig and you want the doors to shut correctly, you have to start adjusting at the back cab corners and then to the Rain Gutter, etc.


LOL

What a day.

 

[D'Animal]

Rain gutter is the next thing to "Adjust".

 

[bigndn]

I love it when UPS damages stuff and it turns into SWAG that can never be sold. LOL


Fits perfectly between the tie downs.

So sick. I'm disgusted by how perfect that is for your truck.

 

[D'Animal]

The paint is still pretty soft so I drove it around a little in the sunshine and began working on the rear skirts.

 

[D'Animal]

Almost done.

Have some more trimming and fitting to do.

 

[D'Animal]

A few more pics.


The bottom of the skirt is contoured to match the shape of the frame. It does not look like it in the pics though.


The front and back needs trimmed, etc.

 

[Centermass]

Looks good Dan. I havent been by in a while it really looks different.

 

[subzali]

what kind of material is that for the skirts?

 

[Dieseler]

Looking at your springs you only have 2 leafs is that going to be enough after you load up the tool box and a full tank of fuel or are you going to add another leaf or two.

 

[D'Animal]

Conveyor Belt material.

what kind of material is that for the skirts?

 

[greenhorn311]

I still have a gallon of orange if you change your mind about color