Fast window mod - motor relays on a PCB! (15 Viewers)

[belouder]

Oh wow-after thinking about it for 2+ years-I finally did the window relay upgrade last week and really enjoy wi does that actually work!! But the extra wire is a mess and I plan on cutting new door cards so this would help that project by reducing the crap in the door!

Please add me to your list and I’m almost willing to drive to SF to hold the camera! But not sure the truck would make it from Idaho.

Very interested-nice job!

 

[Lucky1386]

Just checking in on this, any word?
Thank you

 

[davework]

I am interested as well!

 

[bronco loco]

The suspense is killing me

 

[jonnyd42]

They all work & have been robust over the past couple weeks. My next step is to get a big batch of the boards manufactured for you all & then get the wiring harnesses made as well. End to end turnaround time is probably 4 weeks. I wanted to be shipping them by now but my day job has been insanely busy and will continue to be!

I'll set up a payment link or a website shortly.

I also need to make the install video & will be reaching out to bay area folks to do that. Will get you a free kit if I can use your car for the install.

 

[bronco loco]

My fj 62 really needs it on 4 windows. I hope the wiring in my high roof non-USA FJ62 with round lights, is the same as the FJ62 USA version. My FJ62 uses parts from both, the FJ60 and FJ62 USA versions. It is a gamble when parts are purchased.

 

[IronNam]

My fj 60 really needs it on 4 windows

a can of redbull will help

 

[belouder]

any idea what your price point will be?

 

[jonnyd42]

any idea what your price point will be?

A full install requires 3x boards, 3x wiring harnesses. The butt crimp connectors can be bought cheap from any auto store.
I'll make an install vid.

1 board will be $79 including wiring harness.
3x boards (including 3x harnesses) will be $219.

The harness allows you to easily remove the board in the future if you want to either remove it from the system, replace it with a future part, service it, or remove your door card more easily without taking the switch off of the panel.

 

[bronco loco]

I'm ready to buy it. Need to send the boards to South America to have them installed.

 

[RevISK]

A full install requires 3x boards, 3x wiring harnesses. The butt crimp connectors can be bought cheap from any auto store.
I'll make an install vid.

1 board will be $79 including wiring harness.
3x boards (including 3x harnesses) will be $219.

The harness allows you to easily remove the board in the future if you want to either remove it from the system, replace it with a future part, service it, or remove your door card more easily without taking the switch off of the panel.

Take
My
Money

 

[costahh]

Are you having any delay issues ? Guessing with the de minimis exemption being eliminated this Friday and with all of the crazy that is happening with international shipping coming to a halt into the U.S. we are going to see some delays?

Don't mind paying a higher price due to these circumstances but I can see it being a hurdle in getting these out to the public

 

[onemanarmy]

very interested!