curtislow
Third fj40
I started at the search function and got good info,but I still have a possibly dumb question.Can you replace the rear main seal on my 77 40 without removing the transmission hump, from down below? I've done my f-250 from underneath and know it's probably possible but is it too much of a pain in the a-- to do. I'll be doing this without a lift and will be in no hurry.
Also the reason for this is the ineptitude of the mechanic I had remove and reinstall my rebuilt 2f after a rebuild.He failed to uncap my valve cover vent and created or if nothing else increased my rear main seal leak. Sad thing is I did this rebuild to a pretty good running motor and just wanted to get it done to avoid headaches and ironically leaking oil after I repaired and painted the truck.
Any suggestions would be greatly appreciated,I,ve got all winter to do this.
Also the reason for this is the ineptitude of the mechanic I had remove and reinstall my rebuilt 2f after a rebuild.He failed to uncap my valve cover vent and created or if nothing else increased my rear main seal leak. Sad thing is I did this rebuild to a pretty good running motor and just wanted to get it done to avoid headaches and ironically leaking oil after I repaired and painted the truck.
Any suggestions would be greatly appreciated,I,ve got all winter to do this.