- Thread starter
- #121
Also fitted a front runner awning!
Builds DUKE - 1993 HDJ80 / 1HD-T / 5-Speed / 3x Locked / LHD *A slow DIY build / resto* (1 Viewer)
- Thread starter bryce0225
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #122
What size rhino rack pioneer platform are you using?
- Thread starter
- #124
It’s the 72x56 used on 4 door wranglers
- Thread starter
- #125
retrofitted some One Stone Armrests... love the OEM look and quality.
all that was needed was to reposition the Windsor run lip with some new holes... I took it a step further and bolted it to the door. No rattles or squeaks over here!
all that was needed was to reposition the Windsor run lip with some new holes... I took it a step further and bolted it to the door. No rattles or squeaks over here!
It says on their web site that it is for the 70 series. It's not clear what mods you did to fit the 80...
- Thread starter
- #127
Yeah they are only for the 70 series. It just repositioning some holes on the window run lip (seen in the second photo). Pretty self explanatory when you see it. I went the extra mile and actually bolted through the door to them using some m4 threaded holes that were used for magnets on the armrests.
SteelHunterFJ80
SILVER Star
Hi Ofer, do you happen to have some pictures of where you installed the fuel filters? I like the idea of a pre-filter
I attached a few pics. I also have a pre-prefilter that is just a screen and a trap.
This is a similar filter to what I am using.... I added a circuit that turns an LED in the dash if there is water down in the trap.
Amazon product ASIN B000N9JFBS
Amazon product ASIN B000N9JFBS
- Thread starter
- #131
i had some spare Trek Pak laying around and decided to get things organized.
Nicely done mate.
- Thread starter
- #133
Cheers!
- Thread starter
- #134
After 4 full days of working alone... another big to-do knocked off of the list! The 3in suspension kit from @TRAIL TAILOR is installed and the results are amazing! Duke site perfectly tall and level. The ride and responsiveness is improved. Everything is fresh and clean. i installed new OEM bushings in the front control arms, front and rear pan hard rods, and the front and rear sway bars and sway bar links! I wire brushed everything and repainted what I could. I’m super happy with the results... now just to get it aligned!
- Thread starter
- #135
More photos from the suspension install
Nice! I'm in the midst of replacing my OME lift myself, funny we were probably 10 miles apart fighting the exact same bolts lol. Looking good!
- Thread starter
- #137
Let me know if you want to buy this 20 ton press off me. Used it for just this project and don’t have a place to store it. Paid $250. Yours for $200
Aww man, I bought one too for my transfer case rebuild last spring.
If you have the Wit's End pucks for the lower control arm bushings though I'd love to borrow or buy them off you...going to try the sleeving thing and replace the bushings at the same time. LMK.
If you have the Wit's End pucks for the lower control arm bushings though I'd love to borrow or buy them off you...going to try the sleeving thing and replace the bushings at the same time. LMK.
- Thread starter
- #139
Nice! I don’t have those wits end pucks actually. I borrowed them from @NorCalFJ100
NorCalFJ100
SILVER Star
Hey great job dude! Looks awesome!!!!
