Dual Battery Tray for 03-09 V6 4Runners

[Moody]

My friend made this for another friend's 4runner. He has access to some really nice equipment.



Here is the original one for the V6 4Runner:

Take out the bolt holding the intake hose on there, and install the support bracket.

Slide the tray on in there, bolt in into place...takes all of 15-20 minutes. The bolt we used to connect to the existing hole on the wheel well was a smidgen too long, so it will be replaced with a more snug fitting one.

The install is very much the same as the FJC.


This is one for the Diehard Platinum Marine version (what my friend ended up going with):

Support bracket:

 

[The Jade Bean]

Do you think he could make a tray for my 05 4Runner 4.7L V8?... For this spot -




It would be for a red top Optima which is about 6.5x9.5...if so how much? Thanks!

~Daniel

Sent from deep in the mountains of Honduras using only sticks and rocks.

 

[Moody]

We are in the process of making a tray for the V8 4Runners right now. I have a v8 runner as well.

 

[The Jade Bean]

We are in the process of making a tray for the V8 4Runners right now. I have a v8 runner as well.

Pm me when you have an update please!!!

~Daniel

Sent from deep in the mountains of Honduras using only sticks and rocks.

 

[GXO]

Which would also work for my GX...so I am listening

 

[Moody]

We are working on it. It is a really tight fit...

 

[The Jade Bean]

We are working on it. It is a really tight fit...

Agreed! Might be just enough room for the small red top Optima battery.

~Daniel

Sent from deep in the mountains of Honduras using only sticks and rocks.

 

[fj user]

very nice work. are you guys selling kits for v6?

 

[Moody]

Well, yes...sort of. We have a few on hand right now, and some are just needing to be bent on the press.

I have two in my garage, ready to go. One is for a Optima and one is for the Diehard Platinum. They are $160. If we did a group buy, or we actually had made more than a quantity of six we could do a better price. Stainless steel isn't cheap.

 

[The Jade Bean]

I'm in for a group buy!

~Daniel

Sent from deep in the mountains of Honduras using only sticks and rocks.

 

[ric]

subscribed

 

[Moody]

I put a couple of the v6 4Runner/ FJC trays in the FS section. I will be sure to post up when the V8 trays are ready...

 

[RCsGX]

subscribed.

 

[titanpat57]

What about the 5th Gens?...feeling left out!

Great workmanship!..

 

[The Jade Bean]

Moody... How's the battery tray going for the V8 4th gen Funner going??? I want/need one!!! Thanks!

~Daniel

Sent from deep in the mountains of Honduras using only sticks and rocks.

 

[Moody]

Decided to not do them. In fact, there are 3 of these other trays left and then I'm out forever. Too much bitching about price and "why don't you make them out of plain steel and powder coat them" business.

 

[The Jade Bean]

Decided to not do them. In fact, there are 3 of these other trays left and then I'm out forever. Too much bitching about price and "why don't you make them out of plain steel and powder coat them" business.

Nooooooo!!!! I didn't B_ _ _ h.... I'll pay almost whatever, please just make me one!!!!!!!!! PLEASE, PLEASE, PLEASE!!!!!!!

Sincerely, ~Daniel

Sent from deep in the mountains of Honduras using only sticks and rocks.

 

[The Jade Bean]

In fact I showed the compressor mount to a fab friend and he was SUPER impressed with the craftsmanship as am I!

~Daniel

Sent from deep in the mountains of Honduras using only sticks and rocks.