Dissent offroad modular front bumper

[benc]

The one on the arb.

 

[benc]

Here is the list I have so far. Correct me if I'm wrong.

LandcruiserPhll. 1 DIY front no grill guard

ntsaint. 1 front with small stinger.

99toylc. 1 front. ?grill guard

Mr jits. 1 front DIY no grill guard

Mor4wd 1 front DIY ? Grill guard

Cragfiend. 1 front no grill guard

Ahwangbo 1 front full grill guard

Get outside. 1 front full grill guard

Erb (expoportal) 1 front. Grill guard?

NWforester 1 front. Full grill guard

Any one that wants to be added let me know. Again at these prices I will not be building anything without a deposit. I would also like contact numbers so I can call as I get closer to production and make sure there are no mix ups, thanks I'm going to try and do some more research on any differences with the lx and different years, any info you guys have regarding this matter would be appreciated! I also have a post on expedition portal so you will see then on the list too.

 

[benc]

Ok, so I think the easiest way to do this, is for everyone on the list to email me there vehicle info, contact and shipping info, PayPal info and a list of exactly what they want. Thanks,
(Email) bencalhoon86@gmail.com

 

[benc]

.

 

[benc]

I don't know what happened to the original thread I can't seam to find it anywhere but luckily I wrote everything down. Here is the current list

LandcruiserPhil. DIY front no grill guard

ntsaint. Front with small stinger

99toylc. Front ? Grill guard

Mr jits DIY front no grill guard

More4wd DIY front

Cragfiend front no grill guard

Get outside front full grill guard

Ahwangbo front full grill guard

If you guys could please email me your vehicle info, shipping/contact info and PayPal info and exactly what bumper you want that would be great! I'm not sure what happened to the original thread but my email is bencalhoon86@gmail.com Thanks

 

[Keowee]

benc, the thread has been moved to small business store front in the classifieds. You mentioned that you are making some design changes. Can you update what they might be?

 

[benc]

Ok, good to know. I think the changes are on the original post

 

[Get outside]

Pm sent

 

[benc]

What do you guys think about this for the mounting system?

It hard to tell from the pics but I will try to explain. It is somewhat similar to arb but better. So the shackle mounts are hollow and the brackets off the frame slide into them. The holes in the shackle mounts would be pre drill and Then after you get everything aligned you would drill the holes in the bracket the exact size of the bolts used, thus eliminating any movement from winching like you can get with the arb. This also makes installation and removal very quick and easy! The 4runner on the pic was my prototype and both me and the cust were very happy with how it turned out

 

[benc]

One other thing, the price would have to go up a little as there is more work involved with this system. Not much but prob $50 $75

 

[r2m]

My biggest question is:
Can you make it adjustable to fit on rigs with body lifts so it doesn't look stupid???
I have a 1.75" body lift on mine with 35" M/T's and I'm not looking forward to making my own front bumper (or rear) even though I can. I don't have the time presently.

 

[revoked]

My biggest question is:
Can you make it adjustable to fit on rigs with body lifts so it doesn't look stupid???
I have a 1.75" body lift on mine with 35" M/T's and I'm not looking forward to making my own front bumper (or rear) even though I can. I don't have the time presently.

+1 on the body lift adjustment.

 

[r2m]

What do you mean +1 on the body lift adjustment Revoked?
You need the same thing but just 1" or only ±1" of adjust is available?
Can you clarify?

 

[CreeperSleeper]

I think @revoked wants adjustment available for a body lift just like you do. "+1" is offering his agreement saying that he wants that too. He could have also used "x2". I'm pretty sure he was just using forum short hand.

 

[NWForester]

@benc: Do you have room for one more? I'd like to be added to the list.

 

[Get outside]

Anybody who have subscribed to the original tread got redirected over there!
Link to original tread:

https://forum.ih8mud.com/threads/winch-bumper.826333/

 

[benc]

Anybody who have subscribed to the original tread got redirected over there!
Link to original tread:

https://forum.ih8mud.com/threads/winch-bumper.826333/

Thanks for the link! I guess we need to keep the sales part over there. I think it should be ok to keep the tech part over here

 

[mr jits]

I must have missed it, but what was the price on the DIY?

 

[benc]

As far as the body lift, as of now I will not be offering it. This is already a big enough undertaking. The first batch is all sold. Maybe it the next batch.

 

[benc]

I must have missed it, but what was the price on the DIY?

$500-$600 depending on grill guard