Dissent offroad modular front bumper

[RusoArmo]

I'd also like to know the same question ^^^

Also, on the LX, is there a factory on/off switch somewhere on the dash for the oem foglights or do they just automatically come on with the headlights? I can't remember.

Not sure about the LX but on my TLC it’s on the left side where you turn your headlights to on/auto/off. There is a separate thing to turn for the headlights on/off

 

[heidtman79]

I'd also like to know the same question ^^^

Also, on the LX, is there a factory on/off switch somewhere on the dash for the oem foglights or do they just automatically come on with the headlights? I can't remember.

Not sure about the LX but on my TLC it’s on the left side where you turn your headlights to on/auto/off. There is a separate thing to turn for the headlights on/off

Same on the LX!

 

[Kabanstva]

Can you wire the 3x3s on the Dissent bumper to turn on and off with teh OEM switch on that lever ^^^? BTW thanks guys!

 

[Noob Nate]

I'd also like to know the same question ^^^

Also, on the LX, is there a factory on/off switch somewhere on the dash for the oem foglights or do they just automatically come on with the headlights? I can't remember.

It's on the lever where the headlights are on my 06 LX

 

[BEG]

I'd also like to know the same question ^^^

Also, on the LX, is there a factory on/off switch somewhere on the dash for the oem foglights or do they just automatically come on with the headlights? I can't remember.

It's a ring on the left side stalk that you twist, just inboard of the headlights. You can wire that switch to turn on anything that's connected to the fog light harness. I've used it for other aftermarket bumpers and will use it on my dissent as well.

 

[Noob Nate]

Just got mine back from the shop. Absolutely love it!!

Is there a way I can adjust the 5 little LEDs to be “lined up”?

View attachment 1924069

View attachment 1924070

Looks really sharp, man. Not sure exactly what you mean by lining up your LED's but if you mean like a sequential wiring so they light up in series, I asked Ben about that and currently it seems that option was not available but possibly in the future. I'm guessing there's some people here smarter than me that can figure it out though.

 

[RusoArmo]

Looks really sharp, man. Not sure exactly what you mean by lining up your LED's but if you mean like a sequential wiring so they light up in series, I asked Ben about that and currently it seems that option was not available but possibly in the future. I'm guessing there's some people here smarter than me that can figure it out though.

So the LEDs have some etched lines on the cases that makes the light light look like lines. If you look closely at the pic with the lights on, you’ll see some of the orange LEDs are vertical, horizontal and diagnal. To appease my minor OCD, I’d like them all to face the same way

 

[RusoArmo]

Can you wire the 3x3s on the Dissent bumper to turn on and off with teh OEM switch on that lever ^^^? BTW thanks guys!

Yep, my 3x3s are wired to that. They’re essentially my “fog lights”

 

[Noob Nate]

So the LEDs have some etched lines on the cases that makes the light light look like lines. If you look closely at the pic with the lights on, you’ll see some of the orange LEDs are vertical, horizontal and diagnal. To appease my minor OCD, I’d like them all to face the same way

Ah, I see it now. Never would have noticed. Really looks great.

 

[guardcompany]

What 3x3s come with the bumper? Are they Nilights? I can't zoom in enough on the photos, but thats what it looks like. I'm in between Nilight or just going with the Rigid Pro Ds.

 

[RusoArmo]

What 3x3s come with the bumper? Are they Nilights? I can't zoom in enough on the photos, but thats what it looks like. I'm in between Nilight or just going with the Rigid Pro Ds.

The 3x3s I received are Nilights

 

[Roosevelt T]

What 3x3s come with the bumper? Are they Nilights? I can't zoom in enough on the photos, but thats what it looks like. I'm in between Nilight or just going with the Rigid Pro Ds.

The 3x3s I received are Nilights

Can you guys point me to which Nilights? I don't see a 3x3 model on their website.

Are they these?

Nilight 2PCS 18W Flood Flush Mount LED for Offroad Reverse Light Backu – Nilight Led Light

UPC: 595223064354 SPECIFICATIONS:LED Power: 18 W (6 x 3W LEDs) Beam Type: Flood Beam Waterproof Rate: IP67 Operating Voltage: 9-30V DC LED Color Temperature: 6000K-6500K Working Lifespan: over 30,000 hours Working Temperature: -40~ 85 degrees Material: 6063 aluminum profile, stainless steel...

www.nilight.com

 

[RusoArmo]

Apologies, these are actually 3x2 (or 2x3? Not sure which side you count first).

That looks like the right ones but I'm not sure.

 

[bryson]

Just got mine back from the shop. Absolutely love it!!

Is there a way I can adjust the 5 little LEDs to be “lined up”?

View attachment 1924069

View attachment 1924070

So the LEDs have some etched lines on the cases that makes the light light look like lines. If you look closely at the pic with the lights on, you’ll see some of the orange LEDs are vertical, horizontal and diagnal. To appease my minor OCD, I’d like them all to face the same way

All you have to do is spin the LED. They are round holes, so each light can be turned easily. There are contours on the lenses that will allow you to visually orient them all in the same clocking position. Do that, and your light beams will line up.

 

[guardcompany]

Apologies, these are actually 3x2 (or 2x3? Not sure which side you count first).

That looks like the right ones but I'm not sure.

Really? Dissent's web site says they are 3x3 cut outs. I"m assuming they are these: Amazon

EDIT: Maybe those 2 are the same light.

 

[Lexie470]

Your LX looks awesome, did you go with aluminum or steel? also, what are the yellow running lights in the grill? I am thinking about going with something like this for my set up

Thanks, Kudos to Ben with his artwork. Those amber lights i bought from amazon its same with the one you see from tacoma, 4runner very common.

 

[ibrahim83]

My x20 fit just fine in Ben's front bumper...? No issues at all with included solenoid mount.

Which mount did you use? I'm trying to install my 12k x2o with the solenoid on the side and it hits the trim piece under the grill. No way it'll fit.

Update,
Nevermind, i figured it out, had to use only one bracket from the relocation kit. All is well.

 

[guardcompany]

Which mount did you use? I'm trying to install my 12k x2o with the solenoid on the side and it hits the trim piece under the grill. No way it'll fit.

Update,
Nevermind, i figured it out, had to use only one bracket from the relocation kit. All is well.

Yeah same here. 12k x2o does NOT fit even with the side mounting bracket. Mine is just wedged to the side of the winch and I'll throw a zip tie around it. It was somewhat the icing on the cake of what turned out to be a nightmare install.

 

[ibrahim83]

Yeah same here. 12k x2o does NOT fit even with the side mounting bracket. Mine is just wedged to the side of the winch and I'll throw a zip tie around it. It was somewhat the icing on the cake of what turned out to be a nightmare install.

I got creative with mine and installed the solenoid using one bracket closer to the front of the car. The button and plug are facing the passenger side and it's tilted a bit but I don't care as long as it's in the bumper and fixed in place. I'll snap some pictures tomorrow to show what i did.

Also using a 12k x2o.

 

[guardcompany]

I got creative with mine and installed the solenoid using one bracket closer to the front of the car. The button and plug are facing the passenger side and it's tilted a bit but I don't care as long as it's in the bumper and fixed in place. I'll snap some pictures tomorrow to show what i did.

Also using a 12k x2o.

Thanks! I would love some pictures. Whats the deal with people in this thread saying it fit no problem? Did the bumper design change?