Not sure about the LX but on my TLC it’s on the left side where you turn your headlights to on/auto/off. There is a separate thing to turn for the headlights on/off
Dissent offroad modular front bumper (2 Viewers)
- Thread starter benc
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Not sure about the LX but on my TLC it’s on the left side where you turn your headlights to on/auto/off. There is a separate thing to turn for the headlights on/off
It's a ring on the left side stalk that you twist, just inboard of the headlights. You can wire that switch to turn on anything that's connected to the fog light harness. I've used it for other aftermarket bumpers and will use it on my dissent as well.
Looks really sharp, man. Not sure exactly what you mean by lining up your LED's but if you mean like a sequential wiring so they light up in series, I asked Ben about that and currently it seems that option was not available but possibly in the future. I'm guessing there's some people here smarter than me that can figure it out though.
So the LEDs have some etched lines on the cases that makes the light light look like lines. If you look closely at the pic with the lights on, you’ll see some of the orange LEDs are vertical, horizontal and diagnal. To appease my minor OCD, I’d like them all to face the same way
Yep, my 3x3s are wired to that. They’re essentially my “fog lights”
Ah, I see it now. Never would have noticed. Really looks great.So the LEDs have some etched lines on the cases that makes the light light look like lines. If you look closely at the pic with the lights on, you’ll see some of the orange LEDs are vertical, horizontal and diagnal. To appease my minor OCD, I’d like them all to face the same way
guardcompany
Shea
What 3x3s come with the bumper? Are they Nilights? I can't zoom in enough on the photos, but thats what it looks like. I'm in between Nilight or just going with the Rigid Pro Ds.
The 3x3s I received are Nilights
Can you guys point me to which Nilights? I don't see a 3x3 model on their website.
Are they these?
Nilight 2PCS 18W Flood Flush Mount LED for Offroad Reverse Light Backu – Nilight Led Light
UPC: 595223064354 SPECIFICATIONS:LED Power: 18 W (6 x 3W LEDs) Beam Type: Flood Beam Waterproof Rate: IP67 Operating Voltage: 9-30V DC LED Color Temperature: 6000K-6500K Working Lifespan: over 30,000 hours Working Temperature: -40~ 85 degrees Material: 6063 aluminum profile, stainless steel...
www.nilight.com
Apologies, these are actually 3x2 (or 2x3? Not sure which side you count first).
That looks like the right ones but I'm not sure.
That looks like the right ones but I'm not sure.
All you have to do is spin the LED. They are round holes, so each light can be turned easily. There are contours on the lenses that will allow you to visually orient them all in the same clocking position. Do that, and your light beams will line up.So the LEDs have some etched lines on the cases that makes the light light look like lines. If you look closely at the pic with the lights on, you’ll see some of the orange LEDs are vertical, horizontal and diagnal. To appease my minor OCD, I’d like them all to face the same way
guardcompany
Shea
Really? Dissent's web site says they are 3x3 cut outs. I"m assuming they are these: Amazon
EDIT: Maybe those 2 are the same light.
Thanks, Kudos to Ben with his artwork. Those amber lights i bought from amazon its same with the one you see from tacoma, 4runner very common.
Which mount did you use? I'm trying to install my 12k x2o with the solenoid on the side and it hits the trim piece under the grill. No way it'll fit.
Update,
Nevermind, i figured it out, had to use only one bracket from the relocation kit. All is well.
Last edited:
guardcompany
Shea
Yeah same here. 12k x2o does NOT fit even with the side mounting bracket. Mine is just wedged to the side of the winch and I'll throw a zip tie around it. It was somewhat the icing on the cake of what turned out to be a nightmare install.
I got creative with mine and installed the solenoid using one bracket closer to the front of the car. The button and plug are facing the passenger side and it's tilted a bit but I don't care as long as it's in the bumper and fixed in place. I'll snap some pictures tomorrow to show what i did.
Also using a 12k x2o.
guardcompany
Shea
Thanks! I would love some pictures. Whats the deal with people in this thread saying it fit no problem? Did the bumper design change?
