destins 1964 fj40 FST restore thread (4 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Yep, sweet! Great that you were able to go out and enjoy it!
 
I'm Jealous

Mines still sitting on the rotisserie:crybaby: and you're driving yours:cheers::cheers::cheers: for Destin. Looks Great!

Oh well I did get a small beat up section of the body cut out and replaced this weekend and I have the areas I need to cut the rust out of all marked off so at least I got something done:D
 
Thing seems to have over all great power, maybe running a tad rich, but i was pushing 60 on the freeway and had more floor space to go faster ( not safe in my opinion ) Getting an alignment on wednesday as well :)
Well, nice pics but I missed your doggie, hope you haven`t sold her/him to pay all the bills :D...
..okay back to serious , don`t know how old your tyres are, old tyres getting harder and harder ( unsafe) so new tyres would make her a bit smoother and safer also new shocks.
The original Toyota shocks are not the best.
If you grease your leaf springs between the leaves (I use chain spray for bikes) riding get a bit smoother and it prevents rust between the leaves.
Cheers
Peter

PS: Would control all major screws and nuts after 600 miles.
 
Last edited:
some beach camping photos from tuesday :D

Did not get many cruiser photos unfortunately ;)

4929815565_481d20e3ab_b.jpg

4929902757_277fcd093c_b.jpg

4929830995_b194da9b64_b.jpg

4929831215_774ef86a05_b.jpg


4930421258_9b08471623_b.jpg


4930444326_cc80c4f181_b.jpg


4930457578_32794ffa4a_b.jpg

4929888809_9b75452551_b.jpg

4930475276_6f7dd1088a_b.jpg

4930475388_fb5e2c3d08_b.jpg

4930475346_c91930b272_b.jpg

4929885449_729420d4cf_b.jpg
 
How long do you figure it will take me to make the drive over from Montreal?

Nice pics :beer:
 
What is this "work" you speak of?
 
Bad news fellas

Driving the rig over the bridge, all is great cruising along, and put a lil gas on the down hill, sounded like it was firing on two cylinders.. white smoke blowing out the pipe..

rounded the corner and parked it and had it towed back home.

Oil pressure looked fine, temp looked fine.
Opened the hood, looked like coolant everywhere ( think it is coolant, the break in oil is green as well, but assuming coolant ) Coolant all over the inside of the hood, could not find where it was coming from.
Maybe blown head or gasket? ( dunno what would cause that much white smoke, and engine sounded pretty bad, not at idle but when i put on the gas to round the corner and park it.

I hope since it all happened so fast and i parked it right away all is cool.
Will tow it to the engine rebuilders monday when they open and hopefully get some answers, if you guys know what it might be chime in please.
 
Bad news fellas

Driving the rig over the bridge, all is great cruising along, and put a lil gas on the down hill, sounded like it was firing on two cylinders.. white smoke blowing out the pipe..

rounded the corner and parked it and had it towed back home.

Oil pressure looked fine, temp looked fine.
Opened the hood, looked like coolant everywhere ( think it is coolant, the break in oil is green as well, but assuming coolant ) Coolant all over the inside of the hood, could not find where it was coming from.
Maybe blown head or gasket? ( dunno what would cause that much white smoke, and engine sounded pretty bad, not at idle but when i put on the gas to round the corner and park it.

I hope since it all happened so fast and i parked it right away all is cool.
Will tow it to the engine rebuilders monday when they open and hopefully get some answers, if you guys know what it might be chime in please.

...Destin...just don't know what to say other than this news sucks :censor:
Keep us posted on the findings...hang in there...
 

Users who are viewing this thread

Back
Top Bottom