- Thread starter
- #21
Where'd the holes in the dash come from?
They are three of the five holes for the screws that hold the bottom of the original dash pad against the dash.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Where'd the holes in the dash come from?
I guess I'm not picking up on the hint for a future mod?
I thought that was a Metal Tech cage in there already. Look how the upright curves around the dash.
They are three of the five holes for the screws that hold the bottom of the original dash pad against the dash.
They are three of the five holes for the screws that hold the bottom of the original dash pad against the dash.
Last question...these holes are threaded?
Fast Eddy said:With my crappy caliper I measured 5mmx1.25. It's the same screw that holds the tail light housing to the frame in a '78. Also probably the same screw as holds on the bezel.
Fast Eddy said:With my crappy caliper I measured 5mmx1.25. It's the same screw that holds the tail light housing to the frame in a '78. Also probably the same screw as holds on the bezel.
5mm seems really small. Mark thought it was 8mm but he wasn't home and couldn't check.
BDSeff1fitty said:How do you plan to do the cross bar parallel to the windshield? That's the only reason i haven't bought one yet.