The tranny cover is not able to remove from the cab, is spotted in.
79 cab only! 
75 removable.
Custom HZJ79 from parts, built in the US!
- Thread starter yooper
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The tranny cover is not able to remove from the cab, is spotted in.
79 cab only! 75 removable.
- Joined
- Mar 28, 2003
- Threads
- 33
- Messages
- 334
- Location
- Marquette, MI; Jackson, WY
- Website
- www.tripleplate.com
I got lured over here to try and find some eye candy from the build. Was hoping to find more! You are a much more patient guy than I. Dayum, I would have chewed off my nails and likely my fingers by now haha. Can't wait to see that rolling down the streets and trails of Marquette.
That's gonna be a fine ride. That bumper is pretty.
what are you going to use for seats?
cool. that's what I did. I tried fancy elec. BMW seats... SOOOO comfortable, outside of the truck. But too big. I'm 6'5, so need every inch i can get. Got the stock seats recovered. Had them sew pockets along front edge and on the backrest for storage. Only bummer is being able to figure out some sort of small console/armrest...
But the seats are designed to give maximum leg/head room, and they are pretty comfy. The passenger seat is designed for two people, but I don't know anyone that small (ie: Mini-Me size).
But the seats are designed to give maximum leg/head room, and they are pretty comfy. The passenger seat is designed for two people, but I don't know anyone that small (ie: Mini-Me size).
Dying to see finished pics Yoop.
Hope you have the splits on her.
Hope you have the splits on her.
yooper
SILVER Star
- Thread starter
- #170
Me too. When I finally get it in my hands I'll post a big bunch of detailed pics here.
I bought two sets of OEM steel wheels. The splits are a bit too narrow to run the bigger tires I want.
A set of nonsplit 16x7" for summer with BFG KM2s, 255/85/16.
A set of 16x6" splits for winter that I will mount with the Nokian Hakkapeliitta LT in 235/85-16.
Winter is long here and a good winter tire is vital.
I bought two sets of OEM steel wheels. The splits are a bit too narrow to run the bigger tires I want.
A set of nonsplit 16x7" for summer with BFG KM2s, 255/85/16.
A set of 16x6" splits for winter that I will mount with the Nokian Hakkapeliitta LT in 235/85-16.
Winter is long here and a good winter tire is vital.
yooper said:
so is a good heater. Any idea how good it is in the rig?
Beautiful, well executed job. Congratulations Sean. I'm sure you will love it. We are living vicariously through you.
sent from here to there by the addiction know as mud
Can't wait that thing looks great
Nice AV of the day Sean.
thorvald
.......
- Joined
- Aug 18, 2002
- Threads
- 108
- Messages
- 1,569
- Location
- on the ice, wyoming
- Website
- www.pointyhatdesigns.com
i like the canopy set up.
you will love driving that truck.
hey, did your 1HZ come from a mine truck? You might think about ordering up a timing belt/tensioner/idler. Maybe even a water pump. Cheap insurance. Mine was in less than optimal shape. The mines are a harsh environment and the grime seems to get everywhere. My belt was ok, but the idler and the actual cover were toast.
I also just went through the valve clearance steps, and most of the valves were pretty tight. About half were beyond spec and needed to be reshimmed. Again, cheap insurance; just... time consuming.
you will love driving that truck.
hey, did your 1HZ come from a mine truck? You might think about ordering up a timing belt/tensioner/idler. Maybe even a water pump. Cheap insurance. Mine was in less than optimal shape. The mines are a harsh environment and the grime seems to get everywhere. My belt was ok, but the idler and the actual cover were toast.
I also just went through the valve clearance steps, and most of the valves were pretty tight. About half were beyond spec and needed to be reshimmed. Again, cheap insurance; just... time consuming.
That is a gorgeous truck
Very Nice! Got any interior shots? 
