my hat is off to you.
Builds Cummins 6BT install in FZJ80 (3 Viewers)
- Thread starter Project FJ80
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Ive been reading through all of your posts, and you have one hell of a project going. I dont know if you know how your junk is going, but I snapped a few of these over the weekend. If this is yours.
That's it...and it looks like they haven't touched it
If that was my rig, Psssh I wont even go there. To each his own. I'm expecting a fully caged Coiled over 4-linked front and rear custom everything on 46"tires, crawler, gears, and more. I only hope that picture is 8months old, or that that's not your rig. Talk about parking your money...literally. It's been said and I'll say it again, you are a patient man.
Went to Portal tech's web site and they list a utah phone number
Portal-Tek L.L.C.
801-589-2028
no address. is listed and no one ever answers the phone
the phone book has them as unlisted so you cant get an address.
So I go to the Utah dept of Corporations and it shows that Portal Tech is delinquent (2 years) in re-registering their business with the State. the state is now the registered agent.
If anyone has a physcial address for them I would love to go by and have a look at the 'project'
Portal-Tek L.L.C.
801-589-2028
no address. is listed and no one ever answers the phone
the phone book has them as unlisted so you cant get an address.
So I go to the Utah dept of Corporations and it shows that Portal Tech is delinquent (2 years) in re-registering their business with the State. the state is now the registered agent.
If anyone has a physcial address for them I would love to go by and have a look at the 'project'
uh-oh, spagetti-o's.
Falco80
Burning dinosaur bones...
Just located this thread and read the whole thing, damn what an animal this 80 will be! I agree with everyone here man, when they say you have a lot of patience! Here's hoping you get some progress soon and we can see a 6BT powered 80 rolling on portals. Kudo's to you for having the balls to start this build-up! 
- Thread starter
- #188
Hey. Wheres my rims and tires?
- Thread starter
- #189
This is what its supposed to look like.
.....
3 years, ...
.....
3 years, ...
Last edited:
This is what its supposed to look like.
.....
3 years, ...
It would seem like a call to Portal tech is in order. Looks like wheels off an old 40 have opted for newer cruiser.
wanna sell the 6 inch lift?
- Thread starter
- #193
anyone else in the aera that can check anything out. ?
Heres a 
Maybe this will help.
NameTypeCityStatus
PORTAL-TEK LLCLimited Liability CompanyNorth Salt LakeActive
Business Name
ORTAL-TEK LLC
Entity Number:5780715-0160
Registration Date:11/30/2004
State of Origin:
Address
755 N 700 W
North Salt Lake, UT 84054
Status
Status:Active
Status Description:Good Standing
This Status Date:04/20/2007
Last Renewed:N/A
License Type:LLC - Domestic
Delinquent Date:11/30/2008
Registered Agent
Registered Agent:RUSSELL SMOCK
[Search BES] [Search RPS]
Address Line 1:104 W. 1340 S.
Address Line 2:
City:Farmington
State:UT
Zip:84027
Additional Information
Duration Time:12/31/2099
Incorporated in Home State Date:
NAICS Code:3329
NAICS Title:3329-Other Fabricated Metal Product Manu
Stock Class 1 Amount:
Stock Class 1 Type:
Stock Class 2 Amount:
Stock Class 2 Type:
With this information, you can...
If you would like to view images of paper filings for this
business entity, select the button to the left. You will be
assessed a $ 2.00 fee per image of a document for this
service.
If you would like to purchase a Certificate of Existence for
this business entity, select the button to the left. You will
be assessed a $ 12.00 fee for this service. You will need
Adobe Reader to view this certificate. If you do not have
Adobe Reader, click on the button below and download it.
If you would like to receive information on the principal
individuals associated with this entity, click the button on
the left. You will be assessed a $ 1.00 fee for this
information.
Department of Commerce Home | Division of Corporations Home | Contact Us
Utah.gov Home | Utah.gov Terms of Use | Utah.gov Privacy Policy |
Utah.gov Accessibility Policy
Copyright © 2008 State of Utah - All rights reserved.
Maybe this will help.
NameTypeCityStatus
PORTAL-TEK LLCLimited Liability CompanyNorth Salt LakeActive
Business Name
ORTAL-TEK LLCEntity Number:5780715-0160
Registration Date:11/30/2004
State of Origin:
Address
755 N 700 W
North Salt Lake, UT 84054
Status
Status:Active
Status Description:Good Standing
This Status Date:04/20/2007
Last Renewed:N/A
License Type:LLC - Domestic
Delinquent Date:11/30/2008
Registered Agent
Registered Agent:RUSSELL SMOCK
[Search BES] [Search RPS]
Address Line 1:104 W. 1340 S.
Address Line 2:
City:Farmington
State:UT
Zip:84027
Additional Information
Duration Time:12/31/2099
Incorporated in Home State Date:
NAICS Code:3329
NAICS Title:3329-Other Fabricated Metal Product Manu
Stock Class 1 Amount:
Stock Class 1 Type:
Stock Class 2 Amount:
Stock Class 2 Type:
With this information, you can...
If you would like to view images of paper filings for this
business entity, select the button to the left. You will be
assessed a $ 2.00 fee per image of a document for this
service.
If you would like to purchase a Certificate of Existence for
this business entity, select the button to the left. You will
be assessed a $ 12.00 fee for this service. You will need
Adobe Reader to view this certificate. If you do not have
Adobe Reader, click on the button below and download it.
If you would like to receive information on the principal
individuals associated with this entity, click the button on
the left. You will be assessed a $ 1.00 fee for this
information.
Department of Commerce Home | Division of Corporations Home | Contact Us
Utah.gov Home | Utah.gov Terms of Use | Utah.gov Privacy Policy |
Utah.gov Accessibility Policy
Copyright © 2008 State of Utah - All rights reserved.
So I drove past the Portal Tek during lunch and the 80 is in the shop under a cover saw the back end and the white steel spoke wheels. It seems that someone gave them a heads up. They were actively working on a tube buggy and there were a number of FJ40s in the lot but I did not see the missing bead locked 37s.
I have to ask, what is it that justifies portal tek having the rig for over a year without seemingly doing any work on it? As a customer in that situation I would be fit to be tied. As a business owner I cant imagine taking money from a customer and not delivering for over a year.
So the big Question is: "What information are we missing?"
I have to ask, what is it that justifies portal tek having the rig for over a year without seemingly doing any work on it? As a customer in that situation I would be fit to be tied. As a business owner I cant imagine taking money from a customer and not delivering for over a year.
So the big Question is: "What information are we missing?"
Tapage
Club 4X4 Panamá
So the big Question is: "What information are we missing?"
yes .. we miss the Portal Tek version ..
Any update on this thread?
As a former ID/UT resident, I usually like to think of southeast Idaho/Utah as above usual standards when it comes to honesty. Good western mountain folk, I likes to think. Yet when I see this, it hurts.
When some people are are given money and no oversight/prompting/motivation..... they just take the money, and do nothing. The squeaky wheel gets the grease. No squeaky = no grease/attention. This is made much more difficult by your not being in town: they may feel they can act without fear.
Why does this business use an unlisted number? In order to grow, a business must advertise. Doing the opposite implies the opposite: that they're trying to hide from customers. The state business listing doesn't count, those are public records. The fact that the business registry listed phone number is ignored only reinforces this.
Unfortunately, this means I'll never buy from Portaltek, as I don't live in their town and can't harass them to get my work done.
And what do I tell people when they ask where to get portal axles and such?
Without meaningful resolution, and without Portaltek chiming in with their side of the story, this whole situation makes portaltek look very bad.
-Dan
As a former ID/UT resident, I usually like to think of southeast Idaho/Utah as above usual standards when it comes to honesty. Good western mountain folk, I likes to think. Yet when I see this, it hurts.
When some people are are given money and no oversight/prompting/motivation..... they just take the money, and do nothing. The squeaky wheel gets the grease. No squeaky = no grease/attention. This is made much more difficult by your not being in town: they may feel they can act without fear.
Why does this business use an unlisted number? In order to grow, a business must advertise. Doing the opposite implies the opposite: that they're trying to hide from customers. The state business listing doesn't count, those are public records. The fact that the business registry listed phone number is ignored only reinforces this.
Unfortunately, this means I'll never buy from Portaltek, as I don't live in their town and can't harass them to get my work done.
And what do I tell people when they ask where to get portal axles and such?
Without meaningful resolution, and without Portaltek chiming in with their side of the story, this whole situation makes portaltek look very bad.
-Dan
- Thread starter
- #198
No updates since last month, called and left messages, nothing.. my paitence has run out, but now, I have no time or gas money to go up there. My project has been put on hold for so long, that funds have went to other places, kids, new bills and such....
...
Although, I have noticed they have revamped thier website. as of June 17th. Lots of new and wonderfull projects going on, and some old. but nothing on mine.
Well, time to go, too buzy with lifes other demands right at the moment to worry about a truck thats not going anywhere at the moment.
Hopefully something happens soon, If not, Ill be pulling the plug in the next few months, make some time and go get my junk, and get some axles from somewhere else.
...
Although, I have noticed they have revamped thier website. as of June 17th. Lots of new and wonderfull projects going on, and some old. but nothing on mine.
Well, time to go, too buzy with lifes other demands right at the moment to worry about a truck thats not going anywhere at the moment.
Hopefully something happens soon, If not, Ill be pulling the plug in the next few months, make some time and go get my junk, and get some axles from somewhere else.
Falco80
Burning dinosaur bones...
That's some sad news mate. I would be seriously 
off! Hope something works out for you.....whatever happens. 
off! Hope something works out for you.....whatever happens. Dude Seriously!! I have to put my foot down for you on this one WTF is wrong with you?? I ust read through this thread and am wondering why you or someone else hasnt locked and loaded heading for this place like 10 months ago???
If you dont want your truck i'll go pick it up and take it
not to mention punch everyone within range of that place in the balls!!
At this point even if you really start doing some s*** you are probably in for a long wait getting any work or your money back,i would flip the fxxx out by now
:whoops:
I think that sweet stuff you see in the gallery of there site was built with your money.
If you dont want your truck i'll go pick it up and take it
not to mention punch everyone within range of that place in the balls!!At this point even if you really start doing some s*** you are probably in for a long wait getting any work or your money back,i would flip the fxxx out by now
:whoops:I think that sweet stuff you see in the gallery of there site was built with your money.
