For Sale Boise, ID 6.2L & 6L80 + adapter 80-series swap package ALL NEW

[SNLC]

@TonyP has decided to go diesel in his project so we have this swap package for sale.

6.2L aluminum block v8. Fully rebuilt with new heads and forged pistons. Setup for 475hp but can easily do more with the upgrades it got. This is pre-tune hp.

6L80e 6spd trans, fully rebuilt and setup for 675hp.

MarksAdapters to go from 6L80 to HF2A.

All kinds of goodies in this package like correct Hooker headers for an 80 chassis, Lokar shifter setup, wiring harness/ECU/pedal and more. We can probably even include the trans crossmember we modified to move the engine all the way back against the firewall vs where the Marks Adapter puts it.

I will go through all the stuff included in this package with pics soon. This package will also go well in a 60, 70 or even say a 45 but it is best suited for an 80 swap due to parts included in the package.

$10k plus shipping from 83714. We have a freight account so shipping is no problem.

Cheers

 

[SNLC]

Cheers

 

[SNLC]

We got a van fan and fan clutch for it, which sucks the mechanical fan back a ways.

Cheers

 

[SNLC]

I would say 98% of what you need for a swap is here.

Cheers

 

[SNLC]

Cheers

 

[SNLC]

Engine got ARP hardware throughout.

Cheers

 

[Delta VS]

Heck of a deal. Have a customer who is likely interested in this.

 

[TonyP]

Heck of a deal. Have a customer who is likely interested in this.

Perfect!

 

[TonyP]

I have receipts for the engine build and trans/case build if anyone wants to verify.
They were both outsourced and accomplished by very reputable people/shops.

 

[Tennessee80]

Bad ass setup right there! Wow.

 

[cruisermatt]

What harness and ECU?

 

[TonyP]

Whatever came with the L92 with VATs removed.

 

[SNLC]

Engine during rebuild can be seen here.

Builds - The '93 Troopy Hodgepodge

Doubtful on the v8. Tony has one in mind, pretty sure it is a 4” diameter. The v8 has had a few upgrades during the rebuild process. It should easily be putting out over 450hp. More on that in the coming weeks when it is back in our shop. Really excited to mount up the power train though in the...

forum.ih8mud.com

You can find more details in the thread, big build thread though. I am sure Tony can answer any direct questions you may have, he sourced the powertrain and all related parts. I am more than willing to take pics of whatever anyone wants.

Cheers

 

[TonyP]

Engine during rebuild can be seen here.

Builds - The '93 Troopy Hodgepodge

Doubtful on the v8. Tony has one in mind, pretty sure it is a 4” diameter. The v8 has had a few upgrades during the rebuild process. It should easily be putting out over 450hp. More on that in the coming weeks when it is back in our shop. Really excited to mount up the power train though in the...

forum.ih8mud.com

You can find more details in the thread, big build thread though. I am sure Tony can answer any direct questions you may have, he sourced the powertrain and all related parts. I am more than willing to take pics of whatever anyone wants.

Cheers

Any questions, let me know. I've already fielded a handful with several interested folks.

Here's the notes from the engine rebuild invoice:

"bored to spec for 4.070 forged pistons, balance rotating assemble, installed new
bearing at .0015 clearance. New GM performance cylinder heads( factory replacement specs) added gm blue springs, trunnion upgrade bearings and
chromoly pushrods. Summit racing camshaft and dual roller timing chain. Bearings, springs, lifters, gaskets provided by customer"

 

[KrOswalt]

Shipping to 35476/Tuscaloosa AL?

 

[TonyP]

Sale Pending.
Awaiting payment.

Edit: SOLD