Fantastic! I'll take one. PM sent. More than happy to give you some feedback on installation or anything else you might be looking for if you would like some on this version?
Builds Benjamin’s 3D Prints Build (85 Viewers)
- Thread starter BenCC
- Start date
-
- Tags
- build build thread
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hey @BenCC could you fit one of the Diode Dynamics SS3 in your fog light mount?
www.diodedynamics.com
These are supposedly some of the best performing SAE fog lights on the market. Their Max is even better but not in my price bracket. See here for a ton of SAE Fog Light info:
www.tacomaworld.com
Search results for: 'stage-series-3-sae-dot-yellow-pro-standard-led-pod-pair'
Automotive LED lighting for cars and trucks, including headlight, fog light, turn signal, backup, tail, interior, halos, demon eyes, boards, strips, and more!
www.diodedynamics.com
These are supposedly some of the best performing SAE fog lights on the market. Their Max is even better but not in my price bracket. See here for a ton of SAE Fog Light info:
The LED SAE J583 Fog Pod & Fog Light Review
The LED SAE J583 Fog Pod & Fog Light Review This is a review of nearly all replacement LED SAE J853 fogs lights for a Tacoma and nearly all LED SAE...
www.tacomaworld.com
Hey @BenCC could you fit one of the Diode Dynamics SS3 in your fog light mount?
Search results for: 'stage-series-3-sae-dot-yellow-pro-standard-led-pod-pair'
Automotive LED lighting for cars and trucks, including headlight, fog light, turn signal, backup, tail, interior, halos, demon eyes, boards, strips, and more!
I will buy a set of LX ver tomorrow! I just ordered these fogs over the weekend and was going to try and fudge them behind the little openings next to the fogs.
BenCC
Supporting Vendor
- Thread starter
- #2,164
I can fit them If you can buy and ship a pair to me. Only for LC foglight currently.Hey @BenCC could you fit one of the Diode Dynamics SS3 in your fog light mount?
Search results for: 'stage-series-3-sae-dot-yellow-pro-standard-led-pod-pair'
Automotive LED lighting for cars and trucks, including headlight, fog light, turn signal, backup, tail, interior, halos, demon eyes, boards, strips, and more!
These are supposedly some of the best performing SAE fog lights on the market. Their Max is even better but not in my price bracket. See here for a ton of SAE Fog Light info:
The LED SAE J583 Fog Pod & Fog Light Review
The LED SAE J583 Fog Pod & Fog Light Review This is a review of nearly all replacement LED SAE J853 fogs lights for a Tacoma and nearly all LED SAE...
Curious as to how this would work on the LX since our LX fog housing also has the turn signals. Would the fog light also work as the turn signal?
Would you be able to design in some vertical angular adjustment? Also, they seem to have a wider throw than the Rigid pods, so the front taper might need to be tweaked, do you foresee any issue with that with your current design?
See post specifically on SS3 fogs here - The LED SAE J583 Fog Pod & Fog Light Review - https://www.tacomaworld.com/posts/22622437
1. Delete the turn signals. Are these the only front turn signals?
This is a possibility. LX has a corner light that can be converted into a turn signal. PRWILLARD2 has a post here which walks you through it.
LX470 corner light to turn signal conversion
Upgraded my headlights with HIDs that I got from @Luke111 and decided to upgrade my corner marker lights as well. Got the clear corner lights from @ranma21 I knew that I would need to move my LX470 blinker signals eventually, as I plan to get a new front bumper after this next deployment. But...
forum.ih8mud.com
This would also be a possibility. My personal preference would be to go with the larger fog (Baja Design Squadron) and convert the corner light to a turn signal as discussed in option 1.
Either way, really excited to see this come to fruition for the LX470. Thanks!
BenCC
Supporting Vendor
- Thread starter
- #2,169
I see. I am also aware LX foglight housing is longer. It may have the space for two Squadrons on each side.1. Delete the turn signals. Are these the only front turn signals?
This is a possibility. LX has a corner light that can be converted into a turn signal. PRWILLARD2 has a post here which walks you through it.2. Find a smaller LED such as a Baha Designs S2 and mount it at the corner as the turn signal.
LX470 corner light to turn signal conversion
Upgraded my headlights with HIDs that I got from @Luke111 and decided to upgrade my corner marker lights as well. Got the clear corner lights from @ranma21 I knew that I would need to move my LX470 blinker signals eventually, as I plan to get a new front bumper after this next deployment. But...
This would also be a possibility. My personal preference would be to go with the larger fog (Baja Design Squadron) and convert the corner light to a turn signal as discussed in option 1.
Either way, really excited to see this come to fruition for the LX470. Thanks!View attachment 2587610
I’m probably a little late to the party with the whole ashtray thing.just a few questions.
Is the insert just for the ashtray fitting or is it for the whole plate?
Judging by the mock ups it looks very small, any chance you want to make a panel for the whole piece?
im looking for a whole piece of your interested in making one?
Is the insert just for the ashtray fitting or is it for the whole plate?
Judging by the mock ups it looks very small, any chance you want to make a panel for the whole piece?
im looking for a whole piece of your interested in making one?
This thread is WAY TOO LONG to sift through....any solutions for the space where the DVD player fills? I'd really like to remove mine. CHEERS!
Everything is laid out in the first post.
THANKS
BenCC
Supporting Vendor
- Thread starter
- #2,175
The first foglight mount for Baja Designs Squadron. Will be on the way shortly to @TLCOVERLAND. Thanks for sending me the pods and willing to do the testing.
BenCC
Supporting Vendor
- Thread starter
- #2,177
I got a Toyota switch. It is a push-latch style switch, which definitely has a more factory look than the Carling/ARB style rocker switches. Most of the switch mounting makes can be revised to receive this Toyota switch.
This is a prototype of M6V1 adapted to accept the Toyota switch.
Amazon product ASIN B06XX16SNS
This is a prototype of M6V1 adapted to accept the Toyota switch.
Amazon product ASIN B06XX16SNS
Sorry Ben but while RHD the truck is in France and I have been stuck in London due to lockdown. Still unsure I can make the trip over easter so can’t confirm whether that works or not
This looks soo good. Think you’ll do an LX model?
