So after about a decade of not having a FJ40, I'm back!
Scooped up this beast this weekend. Needs body work and some pieces here and there, but all in all this truck is pretty solid. Previous owner had this rig for 18 years and hooked me up with a great deal.
Extra Tank
11 gallon extra tank with transfer switch for a total of 32 gallons with jerry can on back
Rear Disk Brakes
NV 4500 Transmission w/Centerforce Clutch
Dodge 5.61:1 low & .75:1 overdrive give you rockcrawling to highway cruising
Early Transfer Case
2.31:1 with 5.61:1 and 4.11:1 gears this Hawg crawls at 53.3:1, stock was 28:1
Saginaw Steering
Steering Cooler
Shackle Reversa
4 Inch Spring Lift (Safari)
10.5x33 15 BF Goodrich KM2
Parking Brake Conversion
Ubolt Flip
ARB Front and Rear
Chains for both axels
New Wire Harness
Heavy Duty Drive Shafts
Flowmaster
Johnny Franklin Mufflers
Longfields
Bobby Longfield Cryogenically hardened
New Ring and Pinion
Radiator re-core
Valve Job
Carburator Rebuild
Catalytic Converter
Champion 8,000 LB winch
and a ton of parts/manuals. So it begins!
I put a Bestop rumble seat in last night so I can take the little
for rides!
plan on cutting these lower rockers down and adding sliders ASAP
Scooped up this beast this weekend. Needs body work and some pieces here and there, but all in all this truck is pretty solid. Previous owner had this rig for 18 years and hooked me up with a great deal.
Extra Tank
11 gallon extra tank with transfer switch for a total of 32 gallons with jerry can on back
Rear Disk Brakes
NV 4500 Transmission w/Centerforce Clutch
Dodge 5.61:1 low & .75:1 overdrive give you rockcrawling to highway cruising
Early Transfer Case
2.31:1 with 5.61:1 and 4.11:1 gears this Hawg crawls at 53.3:1, stock was 28:1
Saginaw Steering
Steering Cooler
Shackle Reversa
4 Inch Spring Lift (Safari)
10.5x33 15 BF Goodrich KM2
Parking Brake Conversion
Ubolt Flip
ARB Front and Rear
Chains for both axels
New Wire Harness
Heavy Duty Drive Shafts
Flowmaster
Johnny Franklin Mufflers
Longfields
Bobby Longfield Cryogenically hardened
New Ring and Pinion
Radiator re-core
Valve Job
Carburator Rebuild
Catalytic Converter
Champion 8,000 LB winch
and a ton of parts/manuals. So it begins!
I put a Bestop rumble seat in last night so I can take the little








plan on cutting these lower rockers down and adding sliders ASAP
