- Location
- United States
For Sale or Trade: updated thread below, price drop to $39k
This is a Proffitt's cruisers Stage 3 frame off restoration of a 1966 FJ40 from a few years ago (EDIT: Now that we have hands on it, the most recent tire is 35th week of 2007, so lets say a late 2007-2008 build). 3500 miles since the rebuild. It is a Cummins 4BT swap. H55f 5 speed transmission with split case. ARB lockers front and rear. Spring over and shackle reversal lift. Full cage, Vintage Air AC system. Warn 8274. Updated seats, stereo, Dune Beige paint.
Truck is new to me, I acquired it in a trade for a Jeep LJ that I built over the past 2 years. I have a thread detailing the trade here Jeep LS-LJ/4BT FJ trade.
It is currently on its way from Toledo Ohio to my house in Maine via shipping transport. As discussed in the thread above, I am not convinced that this engine and SOA combo are what I would like to have long term. Since posting that thread, I have also found a 1967 FJ40 in original condition that I would like to do a patina-resto on. I don't really need 2 FJ40s in my life, as different as this one and the patina rig would be.
My plan was to get this truck to Maine and completely baseline it when I am up there in early October. It needs new tires, and I would likely replace the wheels with FJcruiser steelies. I would baseline all of the fluids, belts, and other small wear items for time, not mileage. AC needs a charge. It does not appear to have any other needs from my test drives and inspection. There is a single paint crack in the hood where the underside came in contact with the battery terminal that will need to be touched up, otherwise cosmetically it is clean.
All that said, I am going to offer this up and see if anyone is interested in the truck as it sits now. Decide on your own tire and wheel combo, do your own fluid baseline, etc. You can have the rack that I was planning to unload immediately. It would save me time and money on a rig I will realistically not keep long term.
I spoke with Jeremiah Proffitts and he confirmed that it is a stage 3 frame off from before the original Proffitt's folded its tent in 2013. It does have an aqualu tub, in my opinion a good thing as it's far from original anyway. It was stored winters in Toledo, so has no salt exposure or rust anywhere. These are the pictures I have for now, but I can get more when it arrives in Maine.
This is a good BAT candidate, but I'll offer it up here on Mud first. Price as it sits is $42k. Clean VA title in hand. This is substantially below what Jeremiah quoted as a retail price (60k, which I thought optimistic) and just above what he offered to buy it from me for. I'm open to reasonable discussion.
Even more, I am quite open to trades, as it's always fun to have something new. I now have the patina rig FJ40, so I am pretty set there. I would consider a rust free FJ45, Troopy, LV, Pig (as rust free as an LV or Pig can be) or 60 preferably closer to stock as partial trades. As I need a new wheeling rig, I am also very interested in partial trades for built 60s or 80s.. Rust free and turn key preferred. Tacoma or 4runners built considered. Other oddball stuff might strike me as interesting, it never hurts to ask.
Not in a hurry, but thought I would put it out there before I start sinking money into the truck. Thanks!
EDIT: thread has gotten long, here's an updated pic.
This is a Proffitt's cruisers Stage 3 frame off restoration of a 1966 FJ40 from a few years ago (EDIT: Now that we have hands on it, the most recent tire is 35th week of 2007, so lets say a late 2007-2008 build). 3500 miles since the rebuild. It is a Cummins 4BT swap. H55f 5 speed transmission with split case. ARB lockers front and rear. Spring over and shackle reversal lift. Full cage, Vintage Air AC system. Warn 8274. Updated seats, stereo, Dune Beige paint.
Truck is new to me, I acquired it in a trade for a Jeep LJ that I built over the past 2 years. I have a thread detailing the trade here Jeep LS-LJ/4BT FJ trade.
It is currently on its way from Toledo Ohio to my house in Maine via shipping transport. As discussed in the thread above, I am not convinced that this engine and SOA combo are what I would like to have long term. Since posting that thread, I have also found a 1967 FJ40 in original condition that I would like to do a patina-resto on. I don't really need 2 FJ40s in my life, as different as this one and the patina rig would be.
My plan was to get this truck to Maine and completely baseline it when I am up there in early October. It needs new tires, and I would likely replace the wheels with FJcruiser steelies. I would baseline all of the fluids, belts, and other small wear items for time, not mileage. AC needs a charge. It does not appear to have any other needs from my test drives and inspection. There is a single paint crack in the hood where the underside came in contact with the battery terminal that will need to be touched up, otherwise cosmetically it is clean.
All that said, I am going to offer this up and see if anyone is interested in the truck as it sits now. Decide on your own tire and wheel combo, do your own fluid baseline, etc. You can have the rack that I was planning to unload immediately. It would save me time and money on a rig I will realistically not keep long term.
I spoke with Jeremiah Proffitts and he confirmed that it is a stage 3 frame off from before the original Proffitt's folded its tent in 2013. It does have an aqualu tub, in my opinion a good thing as it's far from original anyway. It was stored winters in Toledo, so has no salt exposure or rust anywhere. These are the pictures I have for now, but I can get more when it arrives in Maine.
This is a good BAT candidate, but I'll offer it up here on Mud first. Price as it sits is $42k. Clean VA title in hand. This is substantially below what Jeremiah quoted as a retail price (60k, which I thought optimistic) and just above what he offered to buy it from me for. I'm open to reasonable discussion.
Even more, I am quite open to trades, as it's always fun to have something new. I now have the patina rig FJ40, so I am pretty set there. I would consider a rust free FJ45, Troopy, LV, Pig (as rust free as an LV or Pig can be) or 60 preferably closer to stock as partial trades. As I need a new wheeling rig, I am also very interested in partial trades for built 60s or 80s.. Rust free and turn key preferred. Tacoma or 4runners built considered. Other oddball stuff might strike me as interesting, it never hurts to ask.
Not in a hurry, but thought I would put it out there before I start sinking money into the truck. Thanks!
EDIT: thread has gotten long, here's an updated pic.
Last edited: