- Thread starter
- #581
Plus I have been happy to help other guys on this forum like they have helped me.
Another 77 FJ40 resto (3 Viewers)
- Thread starter SSCR
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
sterling
SILVER Star
Bottom line is that in the end you are happy and the new owner appreciates the truck for what it is
I read through your entire thread today. Awesome work and I learned a lot. Thanks for sharing
Thanks for the post! I really got a kick out of seeing the hose in its element for the first time!!!
Last edited:
- Thread starter
- #585
I decided to wait till the painter was done with wet sand and touch ups to install my door panels just in case I need to get back into the doors. I did plug in my trouble light to make sure the outlet worked and I got my cool new wrench clip from Tanker120, just need to track down the correct wrenches but that might be a job for the next owner 
- Thread starter
- #586
I found this old photo from Georg after he installed the new OME lift, kinda got a kick out of it. And look the god damn bezel is upside down!
sterling
SILVER Star
Print and put that light pic in a frame!
- Thread starter
- #588
Haha, I think I will.
Look what came in the mail today!
Look what came in the mail today!
sterling
SILVER Star
Is that the Ebay delete plate?
- Thread starter
- #590
No, I bought it from
http://www.redvenomrepros.com/
@jimkyser thanks buddy for the link.
Awesome quality piece and it looks fantastic now that there is no gapping hole in the dash. Really finished the dash off, I'll try to get some better lit pics.
http://www.redvenomrepros.com/
@jimkyser thanks buddy for the link.
Awesome quality piece and it looks fantastic now that there is no gapping hole in the dash. Really finished the dash off, I'll try to get some better lit pics.
I think that IS the ebay delete plate. I think he sells both on ebay and direct from his web sight.
its a very nice reproduction tucker purchased one for his truck.
- Thread starter
- #593
Price was $45 shipped, not sure if that was better than the eBay price for anyone looking.
Looking super as always!
You'd probably get $50 at an auction. Don't do fleabay with this beauty. You should get what it's worth....not give some random (non-Mud member) a smoking deal.
I just got mine from Racer65 last week, looks great. Now, I need to find the inlet part #17751 and clamps part #17882A. Any idea where I can get my hands on the inlet? I'm able to locate the clamps online, but am having no luck finding the inlet.
Thanks for the lead. I'll message him and see if he's up for it.
orangefj45
Supporting Vendor
This 40 is turning out so sweet!!!!!!!!
Nice work Don.
Georg @ Valley Hybrids
Nice work Don.
Georg @ Valley Hybrids
- Thread starter
- #600
Thanks Georg, happy I found that "poser" shot you sent me
Just been plugging away at some small stuff, Roma was kind enough to point me in the right direction on the last parts I had left over that I didn't have a clue went where. These are retainers for the actuator rods in the rear ambi door, I stripped them down shot them with some silver paint (closest I had to the stock blue zinc) and reinstalled them with some stainless hardware.
Just been plugging away at some small stuff, Roma was kind enough to point me in the right direction on the last parts I had left over that I didn't have a clue went where. These are retainers for the actuator rods in the rear ambi door, I stripped them down shot them with some silver paint (closest I had to the stock blue zinc) and reinstalled them with some stainless hardware.
