I have a Becky and it's been great. I think I was 6th in line when production started.
It's solid and happy with it.
It's solid and happy with it.
Last edited:
ACC Rear Door Tire Mount
- Thread starter subspd
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I have a Becky and it's been great. I think I was 6th in line when production started.
It's solid and happy with it.
It's solid and happy with it.
Few more photos
I like where you added a back up light. Solid idea. I already have something else in process for backup lights on a new rear bumper but this would of been a great choice if I wasn't doing the bumper.
When are you getting your Becky?
Patience. Bumper first, then next steps.
Thank you. I wired one of the lights on the right for it. The one on the left I left alone and ran extended wires to the outside. This will allow for any future additional light to be added if I wanted too.
FWIW, I just stumbled on this one, on sale for the magic $550ish people would prefer to pay. 
www.jwoffroad.com
project GX Spare Tire Carrier - GX470 (Standard Length)
Take on your next Adventure, lose that stock spare....This is what we have all been waiting for! This is our Standard Length version to allow All wheel offsets and tire sizes. This version will also you to install All of our attachments. (includes) 3/8 Steel Cross Member brace "Loading Dock"...
www.jwoffroad.com
Where have you been? There is a dedicated thread for that one.FWIW, I just stumbled on this one, on sale for the magic $550ish people would prefer to pay.
project GX Spare Tire Carrier - GX470 (Standard Length)
Take on your next Adventure, lose that stock spare....This is what we have all been waiting for! This is our Standard Length version to allow All wheel offsets and tire sizes. This version will also you to install All of our attachments. (includes) 3/8 Steel Cross Member brace "Loading Dock"...
JW Offroad Spare Tire Mount
forum.ih8mud.com
theferg
SILVER Star
FWIW, I just stumbled on this one, on sale for the magic $550ish people would prefer to pay.
project GX Spare Tire Carrier - GX470 (Standard Length)
Take on your next Adventure, lose that stock spare....This is what we have all been waiting for! This is our Standard Length version to allow All wheel offsets and tire sizes. This version will also you to install All of our attachments. (includes) 3/8 Steel Cross Member brace "Loading Dock"...
Old news. Been around for a few months. There's a whole other thread on here on it.
theferg
SILVER Star
I guess this thread needed a bump since the JW thread already has more posts.Beat me to it.
Where have you been? There is a dedicated thread for that one.
JW Offroad Spare Tire Mount
Old news. Been around for a few months. There's a whole other thread on here on it.
Beat me to it.
I've not been lurking enough, clearly!
Is it this one?
Spare tire on rear door possible on gx470?
forum.ih8mud.com
I hadn't seen it but recently (also albeit waay behind) browsed the entirety of the ACC Becky.
So, bumped that and plugged the jw, I guess.
Since this thread got bumped, I'll give a brief update.
We've been running our Becky since March 2019. Been on about a half dozen trips including GSMTR at Windrock in East TN, Crawl in Hot Springs, Coppingers Cove near Chattanooga and several others, also have around 15k road miles on it. No issues to report.
Quick note, there are, as @BMThiker noted, custom machines steel spacers on all major thru bolts. The spacers have angles cut on each end to properly match the interior shape of the door so as to not deform the steel panels.
All is well. And to throw my $0.02 in, I wish the other guys luck, but I will stand firm on my thoughts that the ACC unit is a superior design and was well thought out.
We've been running our Becky since March 2019. Been on about a half dozen trips including GSMTR at Windrock in East TN, Crawl in Hot Springs, Coppingers Cove near Chattanooga and several others, also have around 15k road miles on it. No issues to report.
Quick note, there are, as @BMThiker noted, custom machines steel spacers on all major thru bolts. The spacers have angles cut on each end to properly match the interior shape of the door so as to not deform the steel panels.
All is well. And to throw my $0.02 in, I wish the other guys luck, but I will stand firm on my thoughts that the ACC unit is a superior design and was well thought out.
More Becky's in production:
Looks like it’s a good time for a group buy
