A rookie M416 build (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

hey you

SILVER Star
Joined
Dec 12, 2008
Threads
61
Messages
550
Location
California
I did the SOA on the trailer and it sets perfect with the cruiser. I wanted to add a custom axle and an electric brake hub (10") to match the track and the wheels on the cruiser. I was wondering if someone else has a similar setup that I want to build. The cruiser measures at about 55" WMS to WMS. If I'm measuring this correctly, I need to order a 58" axle. With a combined total of 12" total of back spacing (3.5") and tire width (33x12.50x15's), this would leave me 2" of clearance between the frame (42" wide) and the tires on each side. I'm thinking 2" of clearance because of gross trailer weight and tire flex off-road.
FJ40-M416

Is this correct or would you go wider or narrower?
 
Trailer looks great! Now you've gotta tear it down and get it painted to preserve it.
 
Trailer looks great! Now you've gotta tear it down and get it painted to preserve it.

2X on the painting it. Look at my trailer build, the link is in my signature. I found plenty of rust hiding between the bed and frame, while the rest of the trailer looked fine.

That's a nice looking trailer.
 

Users who are viewing this thread

Back
Top Bottom